Call Us : +91-0253-2351916
11-Thermal Insulation Acoustics
| Vol 04.06 2008 Thermal Insulation Acoustics | |
| C 163 | Standard Practice for Mixing Thermal Insulating Cement Samples1 |
| C 165 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations1 |
| C 166 | Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement1 |
| C 167 | Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| C 168 | Standard Terminology Relating to Thermal Insulation1 |
| C 177 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus1 |
| C 195 | Standard Specification for Mineral Fiber Thermal Insulating Cement1 |
| C 196 | Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement1 |
| C 203 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation1 |
| C 208 | Standard Specification for Cellulosic Fiber Insulating Board1 |
| C 209 | Standard Test Methods for Cellulosic Fiber Insulating Board1 |
| C 240 | Standard Test Methods of Testing Cellular Glass Insulation Block1 |
| C 302 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| C 303 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation1 |
| C 335 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation1 |
| C 351 | Standard Test Method for Mean Specific Heat of Thermal Insulation1 |
| C 356 | Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat1 |
| C 367 | Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels1 |
| C 384 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method1 |
| C 390 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots1 |
| C 411 | Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation1 |
| C 419 | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings1 |
| C 421 | Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation1 |
| C 423 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method1 |
| C 447 | Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations1 |
| C 449 | Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement1 |
| C 450 | Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging1 |
| C 461 | Standard Test Methods for Mastics and Coatings Used With Thermal Insulation1 |
| C 488 | Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation1 |
| C 516 | Standard Specification for Vermiculite Loose Fill Thermal Insulation1 |
| C 518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus1 |
| C 520 | Standard Test Methods for Density of Granular Loose Fill Insulations1 |
| C 522 | Standard Test Method for Airflow Resistance of Acoustical Materials1 |
| C 533 | Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation1 |
| C 534/C 534M | Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form1 |
| C 547 | Standard Specification for Mineral Fiber Pipe Insulation1 |
| C 549 | Standard Specification for Perlite Loose Fill Insulation1 |
| C 550 | Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation1 |
| C 552 | Standard Specification for Cellular Glass Thermal Insulation1 |
| C 553 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications1 |
| C 578 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation1 |
| C 585 | Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)1 |
| C 591 | Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation1 |
| C 592 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)1 |
| C 610 | Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation1 |
| C 612 | Standard Specification for Mineral Fiber Block and Board Thermal Insulation1 |
| C 634 | Standard Terminology Relating to Building and Environmental Acoustics1 |
| C 635/C 635M | Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings1 |
| C 636/C 636M | Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels1 |
| C 647 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation1 |
| C 653 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation1 |
| C 656 | Standard Specification for Structural Insulating Board, Calcium Silicate1 |
| C 665 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing1 |
| C 667 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air1 |
| C 680 | Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs1 |
| C 686 | Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation1 |
| C 687 | Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation1 |
| C 692 | Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel1 |
| C 726 | Standard Specification for Mineral Fiber Roof Insulation Board1 |
| C 727 | Standard Practice for Installation and Use of Reflective Insulation in Building Constructions1 |
| C 728 | Standard Specification for Perlite Thermal Insulation Board1 |
| C 739 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation1 |
| C 740 | Standard Practice for Evacuated Reflective Insulation In Cryogenic Service1 |
| C 745 | Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter1 |
| C 755 | Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation1 |
| C 764 | Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation1 |
| C 795 | Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel1 |
| C 800 | Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)1 |
| C 835 | Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C1 |
| C 846 | Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing1 |
| C 870 | Standard Practice for Conditioning of Thermal Insulating Materials1 |
| C 871 | Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions1 |
| C 892 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation1 |
| C 916 | Standard Specification for Adhesives for Duct Thermal Insulation1 |
| C 921 | Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation1 |
| C 929 | Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel1 |
| C 930 | Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories1 |
| C 945 | Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels1 |
| C 950 | Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels1 |
| C 991 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings1 |
| C 1014 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation1 |
| C 1015 | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation1 |
| C 1029 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation1 |
| C 1041 | Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers1 |
| C 1043 | Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources1 |
| C 1044 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode1 |
| C 1045 | Standard Practice for Calculating Thermal Transmission Properties Under Steady- State Conditions1 |
| C 1046 | Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components1 |
| C 1055 | Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries1 |
| C 1057 | Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer1 |
| C 1058 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation1 |
| C 1060 | Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings1 |
| C 1071 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)1 |
| C 1086 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation1 |
| C 1094 | Standard Guide for Flexible Removable Insulation Covers1 |
| C 1101/C 1101M | Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation1 |
| C 1104/C 1104M | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation1 |
| C 1114 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus1 |
| C 1126 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation1 |
| C 1129 | Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges1 |
| C 1130 | Standard Practice for Calibrating Thin Heat Flux Transducers1 |
| C 1134 | Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion1 |
| C 1136 | Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation1 |
| C 1139 | Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications1 |
| C 1146 | Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air1 |
| C 1149 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation1 |
| C 1153 | Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging1 |
| C 1155 | Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data1 |
| C 1158 | Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction1 |
| C 1199 | Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods1 |
| C 1224 | Standard Specification for Reflective Insulation for Building Applications1 |
| C 1258 | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation1 |
| C 1263 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders1 |
| C 1289 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board1 |
| C 1290 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts1 |
| C 1302 | Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards1 |
| C 1303 | Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation1 |
| C 1304 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials1 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials1 |
| C 1313 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications1 |
| C 1320 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction1 |
| C 1321 | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction1 |
| C 1335 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation1 |
| C 1338 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings 1 |
| C 1340 | Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program1 |
| C 1363 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus1 |
| C 1371 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers1 |
| C 1373 | Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions1 |
| C 1374 | Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation1 |
| C 1393 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks1 |
| C 1409 | Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components1 |
| C 1410 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation1 |
| C 1423 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation1 |
| C 1427 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form1 |
| C 1482 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation1 |
| C 1483 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings1 |
| C 1484 | Standard Specification for Vacuum Insulation Panels1 |
| C 1485 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source1 |
| C 1488 | Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation1 |
| C 1497 | Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation1 |
| C 1498 | Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials1 |
| C 1511 | Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)1 |
| C 1512 | Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products1 |
| C 1534 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems1 |
| C 1549 | Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer1 |
| C 1558 | Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation1 |
| C 1559 | Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)1 |
| C 1574 | Standard Guide for Determining Blown Density of Pneumatically Applied Loose- Fill Mineral Fiber Thermal Insulation1 |
| C 1594 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation1 |
| C 1616 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight1 |
| C 1617 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals1 |
| C 1630 | Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations1 |
| C 1631 | Standard Specification for Cellular Polypropylene Thermal Insulation1 |
| C 1639 | Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation1 |
| C 1667 | Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of- Panel Thermal Resistivity of Vacuum Panels1 |
| C 1676 | Standard Specification for Microporous Thermal Insulation1 |
| E 90 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements1 |
| E 96/E 96M | Standard Test Methods for Water Vapor Transmission of Materials1 |
| E 336 | Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings1 |
| E 413 | Classification for Rating Sound Insulation1 |
| E 477 | Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers1 |
| E 492 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine1 |
| E 557 | Standard Guide for The Installation of Operable Partitions1 |
| E 580/E 580M | Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions1 |
| E 596 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound- Isolating Enclosures1 |
| E 756 | Standard Test Method for Measuring Vibration-Damping Properties of Materials1 |
| E 795 | Standard Practices for Mounting Test Specimens During Sound Absorption Tests1 |
| E 966 | Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements1 |
| E 989 | Standard Classification for Determination of Impact Insulation Class (IIC)1 |
| E 1007 | Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures1 |
| E 1014 | Standard Guide for Measurement of Outdoor A-Weighted Sound Levels1 |
| E 1042 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| E 1050 | Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System1 |
| E 1110 | Standard Classification for Determination of Articulation Class1 |
| E 1111 | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components1 |
| E 1123 | Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials1 |
| E 1124 | Standard Test Method for Field Measurement of Sound Power Level by the Two- Surface Method1 |
| E 1130 | Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index1 |
| E 1179 | Standard Specification for Sound Sources Used for Testing Open Office Components and Systems1 |
| E 1222 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems1 |
| E 1264 | Standard Classification for Acoustical Ceiling Products1 |
| E 1265 | Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers1 |
| E 1289 | Standard Specification for Reference Specimen for Sound Transmission Loss1 |
| E 1332 | Standard Classification for Determination of Outdoor-Indoor Transmission Class1 |
| E 1374 | Standard Guide for Open Office Acoustics and Applicable ASTM Standards1 |
| E 1408 | Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems1 |
| E 1414 | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum1 |
| E 1433 | Standard Guide for Selection of Standards on Environmental Acoustics1 |
| E 1503 | Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System1 |
| E 1573 | Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels1 |
| E 1574 | Standard Test Method for Measurement of Sound in Residential Spaces1 |
| E 1686 | Standard Guide for Selection of Environmental Noise Measurements and Criteria1 |
| E 1704 | Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures1 |
| E 1779 | Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements1 |
| E 1780 | Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source1 |
| E 2179 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors1 |
| E 2202 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards1 |
| E 2235 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods1 |
| E 2249 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity1 |
| E 2459 | Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans1 |
| R0017 | SI QUICK REFERANCE GUIDE INTERNATIONAL SYSTEM OF UNITS (SI) THE MODERN METRIC SYSTEMS |
