LIST E ASTM STANDARDS

E1-07 Standard Specification for ASTM Liquid-in-Glass Thermometers
E1-RUS-07 Стандартная спецификация на стеклянные жидкостные термометры ASTM
E3-11 Standard Guide for Preparation of Metallographic Specimens
E4-13 Standard Practices for Force Verification of Testing Machines
E6-09be1 Standard Terminology Relating to Methods of Mechanical Testing
E6-RUS-09be1 Стандартная терминология по методам механических испытаний
E7-03(2009) Standard Terminology Relating to Metallography
E8/E8M-11 Standard Test Methods for Tension Testing of Metallic Materials
E8/E8M-RUS-11 Стандартные методы испытаний металлических материалов на растяжение
E9-09 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E10-12 Standard Test Method for Brinell Hardness of Metallic Materials
E10-RUS-12 Стандартный метод определения твердости по Бринеллю для материалов с металлическими свойствами
E11-09e1 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
E11-RUS-09e1 Стандартная на проволочную ситоткань и сита для испытательных целей
E18-12 Standard Test Methods for Rockwell Hardness of Metallic Materials
E18-RUS-12 Стандартные методы определения твердости по Роквеллу материалов с металлическими свойствами
E21-09 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E21-RUS-09 Стандартные методы испытаний металлических материалов на растяжение при повышенных температурах
E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E28-99(2009) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
E28-RUS-99(2009) Стандартные методы определения температуры размягчения смол, взятых из шкиперского имущества,
методом кольца и шара
E29-08 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E29-RUS-08 Стандартная методика использования значащих цифр в данных по испытаниям для определения
соответствия техническим условиям
E32-86(2006)e1 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
E34-11e1 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
E37-05(2011) Standard Test Methods for Chemical Analysis of Pig Lead
E41-92(2010) Terminology Relating to Conditioning
E45-13 Standard Test Methods for Determining the Inclusion Content of Steel
E50-11 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and
Related Materials
E53-07 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E53-RUS-07 Стандартный метод определения меди в нелегированной меди с помощью гравиметрии
E55-11 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E60-11 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
E69-02(2007) Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
E70-07 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
E70-RUS-07 Стандартный метод испытаний для определения показателя рН водных растворов с помощью стеклянного
электрода
E72-10 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73-13 Standard Practice for Static Load Testing of Truss Assemblies
E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
E77-07 Standard Test Method for Inspection and Verification of Thermometers
E77-RUS-07 Стандартный метод контроля и поверки термометров
E81-96(2011) Standard Test Method for Preparing Quantitative Pole Figures
E82-09 Standard Test Method for Determining the Orientation of a Metal Crystal
E83-10a Standard Practice for Verification and Classification of Extensometer Systems
E83-RUS-10a Стандартное практическое руководство по поверке и классификации систем экстензометров
E84-13 Standard Test Method for Surface Burning Characteristics of Building Materials
E88-11 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E90-09 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and
Elements
E94-04(2010) Standard Guide for Radiographic Examination
E95-68(2011) Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation
E96/E96M-12 Standard Test Methods for Water Vapor Transmission of Materials
E100-10 Standard Specification for ASTM Hydrometers
E102/E102M-93(2009) Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
E104-02(2012) Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
E105-10 Standard Practice for Probability Sampling Of Materials
E105-RUS-10 Стандартная методика вероятностной выборки материалов
E108-11 Standard Test Methods for Fire Tests of Roof Coverings
E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
E110-RUS-10 Стандартный метод испытания для определения твердости металлических материалов методом
вдавливания с использованием переносных твердомеров
E111-04(2010) Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
E112-12 Standard Test Methods for Determining Average Grain Size
E114-10 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
E119-12a Standard Test Methods for Fire Tests of Building Construction and Materials
E122-09e1 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic
of a Lot or Process
E122-RUS-09e1 Стандартная методика расчета объема выборки для оценки средних показателей партии или процесса с
заданной сходимостью
E123-02(2012) Standard Specification for Apparatus for Determination of Water by Distillation
E124-94(2010) Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
E125-63(2013) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
E127-10 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
E130-08 Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes
E131-10 Standard Terminology Relating to Molecular Spectroscopy
E132-04(2010) Standard Test Method for Poisson’s Ratio at Room Temperature
E133-92(2010) Standard Specification for Distillation Equipment
E135-11b Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
E139-11 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell
Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
E141-10 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature
E144-94(2011) Standard Practice for Safe Use of Oxygen Combustion Bombs
E145-94(2011) Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
E145-RUS-94(2011) Стандартная спецификация на термостаты с гравитационной и принудительной конвекцией
E147-61(2011) Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
E154/E154M-08a(2013)e1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs,
on Walls, or as Ground Cover
E155-10 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
E159-10 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
E161-12 Standard Specification for Precision Electroformed Sieves
E162-13 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E164-08 Standard Practice for Contact Ultrasonic Testing of Weldments
E165/E165M-12 Standard Practice for Liquid Penetrant Examination for General Industry
E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
E169-04(2009) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
E170-10 Standard Terminology Relating to Radiation Measurements and Dosimetry
E171/E171M-11 Standard Practice for Conditioning and Testing Flexible Barrier Packaging
E175-82(2010) Standard Terminology of Microscopy
E176-13 Standard Terminology of Fire Standards
E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E178-08 Standard Practice for Dealing With Outlying Observations
E179-12 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of
Materials
E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
E185-10 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
E186-10 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings
E186-RUS-10 Стандартные эталонные рентгенограммы толстостенных (толщиной от 2 до 41/2 дюйма (от 50.8 до 114 мм))
стальных литых изделий
E190-92(2008) Standard Test Method for Guided Bend Test for Ductility of Welds
E190-RUS-92(2008) Стандартный метод испытания на управляемый изгиб для определения пластичности сварных швов
E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-
Metallic Compounds
E192-04(2010)e1 Standard Reference Radiographs of Investment Steel Castings of Aerospace Applications
E192-RUS-04(2010)e1 Стандартные эталонные рентгенограммы стальных отливок, полученных литьем по выплавляемым
моделям, для аэрокосмического применения
E193-94(2010) Standard Specification for Laboratory Glass Micropipets
E194-10 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
E196-06(2012) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E200-08 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical
Analysis
E202-12 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
E203-08 Standard Test Method for Water Using Volumetric Karl Fischer Titration
E203-RUS-08 Стандартный метод определения содержания воды с помощью вольюметрического титрования по методу
Карла Фишера
E204-98(2007) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band
and Chemical Classification Index
E205-96(2010) Standard Specification for Glass and Oxygen Combustion Flask
E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference
Thermoelement of Similar EMF-Temperature Properties
E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of
Ferritic Steels
E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or
Rapid Heating Rates and Strain Rates
E210-63(2010) Standard Specification for Microscope Objective Thread
E211-82(2010) Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
E213-09 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E213-RUS-09 Стандартная методика проведения ультразвуковой дефектоскопии металлических труб и трубопроводов
E215-11 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques
E222-10 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
E223-08 Standard Test Methods for Analysis of Sulfuric Acid
E224-08 Standard Test Methods for Analysis of Hydrochloric Acid
E228-11 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
E230/E230M-12 Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
E235/E235M-12 Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or
for Other High-Reliability Applications
E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
E237-02(2012) Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
E238-12 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings
E242-01(2010) Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed
E243-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
E243-RUS-09 Стандартное практическое руководство по электромагнитной дефектоскопии (вихревыми токами) трубок из
меди и медных сплавов
E246-10 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
E247-01(2010) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by
Gravimetry
E248-12 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed
Permanganate Potentiometric Titrimetry
E250-98(2009) Standard Practice for Use of CODEN
E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
E252-06 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
E253-13 Standard Terminology Relating to Sensory Evaluation of Materials and Products
E255-07 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E256-09 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
E258-07 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
E259-06(2011) Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for
Hemispherical and Bi-Directional Geometries
E260-96(2011) Standard Practice for Packed Column Gas Chromatography
E261-10 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
E262-13 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by
Radioactivation Techniques
E263-09 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
E264-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
E265-07(2013) Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
E266-11 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
E272-10 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
E273-10 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
E274/E274M-11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
E276-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing
Ores and Related Materials
E278-01(2010)e1 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and
Nitric Acid Titrimetry
E279-97(2010) Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test
E280-10 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings
E283-04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors
Under Specified Pressure Differences Across the Specimen
E284-13 Standard Terminology of Appearance
E285-08 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
E287-02(2012) Standard Specification for Laboratory Glass Graduated Burets
E288-10 Standard Specification for Laboratory Glass Volumetric Flasks
E289-04(2010) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E290-09 Standard Test Methods for Bend Testing of Material for Ductility
E290-RUS-09 Стандартные методы испытаний материалов на пластичность при изгибе
E291-09 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium
Hydroxide)
E292-09e1 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E295-82(2006) Standard Test Method for Measured Speed of Oil Diffusion Pumps
E296-70(2010) Standard Practice for Ionization Gage Application to Space Simulators
E298-08 Standard Test Methods for Assay of Organic Peroxides
E299-08 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
E299-RUS-08 Стандартный метод определения микропримесей пероксидов в органических растворителях
E300-03(2009) Standard Practice for Sampling Industrial Chemicals
E300-RUS-03(2009) Стандартная методика отбора проб промышленных химических продуктов
E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
E308-12 Standard Practice for Computing the Colors of Objects by Using the CIE System
E309-11 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E310-10 Standard Reference Radiographs for Tin Bronze Castings
E312-06(2011) Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film)
Cameras and Digital Still Cameras (DSC)
E313-10 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
E313-RUS-10 Стандартная методика для вычисления индексов желтизны и белизны по координатам цвета, измеренным с
помощью приборов
E314-10 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate
(Photometric) Techniques
E316-11 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
E317-11 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems
without the Use of Electronic Measurement Instruments
E319-85(2008) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
E321-96(2012) Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)
E322-12 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence
Spectrometry
E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes
E328-02(2008) Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E329-11c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
E330-02(2010) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by
Uniform Static Air Pressure Difference
E331-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform
Static Air Pressure Difference
E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis
E336-11 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
E337-02(2007) Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb
Temperatures)
E340-00(2006) Standard Test Method for Macroetching Metals and Alloys
E340-RUS-00(2006) Металлы и сплавы. Стандартный метод контроля макроструктуры травлением
E341-08 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
E342-11 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
E344-12 Terminology Relating to Thermometry and Hydrometry
E345-93(2008) Standard Test Methods of Tension Testing of Metallic Foil
E346-08 Standard Test Method for Analysis of Methanol
E346-RUS-08 Стандартные методы анализа метанола
E349-06 Standard Terminology Relating to Space Simulation
E350-12 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and
Wrought Iron
E351-13 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
E352-13 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353-93(2006) Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys
E353-RUS-93(2006) Сплавы нержавеющие жаропрочные мартенситно-стареющие и другие аналогичные хром-никель-
железные. Методы химического анализа
E354-93(2006) Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron,
Nickel, and Cobalt Alloys
E355-96(2007) Standard Practice for Gas Chromatography Terms and Relationships
E359-10 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
E363-09 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
E367-09 Standard Test Methods for Chemical Analysis of Ferroniobium
E372-01(2006) Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon
E376-11 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing
Methods
E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
E381-01(2012) Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
E384-11e1 Standard Test Method for Knoop and Vickers Hardness of Materials
E384-RUS-11e1 Стандартный метод испытаний материалов на твердость по Кнупу и Виккерсу
E385-11 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
E386-90(2011) Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR)
Spectroscopy
E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque
Filter Method
E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,
E389-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-
Bearing Ores and Related Materials
E390-11 Standard Reference Radiographs for Steel Fusion Welds
E393-08 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
E394-09 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
E394-RUS-09 Стандартный метод определения микросодержания железа с помощью 1,10-фенантролина
E396-12e1 Standard Test Methods for Chemical Analysis of Cadmium
E398-03(2009)e1 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity
Measurement
E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
E406-81(2012) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis
E407-07e1 Standard Practice for Microetching Metals and Alloys
E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E410-08 Standard Test Method for Moisture and Residue in Liquid Chlorine
E411-12 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
E413-10 Classification for Rating Sound Insulation
E415-08 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
E415-RUS-08 Стандартный Метод атомно-эмиссионного вакуумного спектрометричского анализа углеродистой и
низколегированной стали
E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
E424-71(2007) Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
E426-12 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium,
Austenitic Stainless Steel and Similar Alloys
E427-95(2006) Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode)
E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic
Testing
E430-11 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
E431-96(2011) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
E432-91(2011) Standard Guide for Selection of a Leak Testing Method
E433-71(2008) Standard Reference Photographs for Liquid Penetrant Inspection
E434-10 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to
Hemispherical Emittance Using Solar Simulation
E436-03(2008) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
E436-RUS-03(2008) Стандартный метод испытания ферритных сталей на разрыв падающим грузом
E438-92(2011) Standard Specification for Glasses in Laboratory Apparatus
E439-10 Standard Test Methods for Chemical Analysis of Beryllium
E444-09 Standard Guide for Scope of Work of Forensic Document Examiners
E445/E445M-88(2008) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With
Full-Scale Tires
E446-10 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
E446-RUS-10 Стандартные эталонные рентгенограммы стальных литых изделий толщиной до 2 дюймов (50.8 мм)
E448-82(2008) Standard Practice for Scleroscope Hardness Testing of Metallic Materials
E449-08 Standard Test Methods for Analysis of Calcium Chloride
E452-02(2013) Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
E455-11 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E456-12e1 Standard Terminology Relating to Quality and Statistics
E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E458-08 Standard Test Method for Heat of Ablation
E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E460-12 Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
E463-09 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
E465-11 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
E466-07 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E466-RUS-07
Стандартное практическое руководство по проведению испытаний металлических материалов на усталость в осевом
направлении в условиях регулируемого усилия и постоянной амплитуды
E467-08e1 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E468-11 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E471-96(2011) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
E473-11a Standard Terminology Relating to Thermal Analysis and Rheology
E475-10 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
E477-06a Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated
Silencers
E478-08 Standard Test Methods for Chemical Analysis of Copper Alloys
E479-91(2006) Standard Guide for Preparation of a Leak Testing Specification
E481-10 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver
E482-11e1 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
E487-09 Standard Test Method for Constant-Temperature Stability Of Chemical Materials
E488/E488M-10 Standard Test Methods for Strength of Anchors in Concrete Elements
E490-00a(2006) Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
E491-73(2010) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E492-09 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies
Using the Tapping Machine
E493/E493M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
E494-10 Standard Practice for Measuring Ultrasonic Velocity in Materials
E496-09 Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by
Radioactivation Techniques 1
E498/E498M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer
Probe Mode
E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
E502-07e1 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by
Closed Cup Methods
E505-01(2011) Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
E506-08 Standard Test Method for Mercury in Liquid Chlorine
E507-09 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
E508-09 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption
Spectrometry
E509-03(2008) Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
E511-07 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
E512-94(2010) Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with
Electromagnetic and Particulate Radiation
E514/E514M-11 Standard Test Method for Water Penetration and Leakage Through Masonry
E515-11 Standard Practice for Leaks Using Bubble Emission Techniques
E516-95a(2013) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
E517-00(2010) Standard Test Method for Plastic Strain Ratio r for Sheet Metal
E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry
E519/E519M-10 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
E520-08 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
E521-96(2009)e1 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation
E523-11 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
E526-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
E527-12 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E529-04(2011) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E531-13 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
E534-08 Standard Test Methods for Chemical Analysis of Sodium Chloride
E535-12 Standard Practice for Preparation of Fire-Test-Response Standards
E536-08 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
E538-98(2008) Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
E541-10 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E542-01(2012) Standard Practice for Calibration of Laboratory Volumetric Apparatus
E543-13 Standard Specification for Agencies Performing Nondestructive Testing
E544-10 Standard Practices for Referencing Suprathreshold Odor Intensity
E545-05(2010) Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
E546-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E547-00(2009) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic
Static Air Pressure Difference
E549-87(2008) Standard Guide for Preparing Field Sprayer Calibration Procedures
E550-87(2008) Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
E556/E556M-11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User
Level)
E557-12 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by
Operable Partitions
E561-10e2 Standard Test Method for K-R Curve Determination
E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
E563-11 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
E564-06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E566-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
E569/E569M-13 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
E570-09 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
E570-RUS-09 Стандартная методика контроля рассеяния магнитного потока стальных ферромагнитных трубных изделий
E571-12 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
E572-12 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence
Spectrometry
E573-01(2013) Standard Practices for Internal Reflection Spectroscopy
E574-06 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
E575-05(2011) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and
Assemblies
E576-08 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E578-07(2013) Standard Test Method for Linearity of Fluorescence Measuring Systems
E579-04(2009) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution
E580/E580M-11b Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas
Subject to Earthquake Ground Motions
E581-10 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
E582-07 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
E585/E585M-12 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
E587-10 Standard Practice for Ultrasonic Angle-Beam Contact Testing
E588-03(2009) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
E592-99(2009)e1 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to
2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60
E594-96(2011) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum
Environment
E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E598-08 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient,
Null-Point Calorimeter
E601-07(2013) Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials
with Time in Air
E603-12b Standard Guide for Room Fire Experiments
E604-83(2008) Standard Test Method for Dynamic Tear Testing of Metallic Materials
E605-93(2011) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural
Members
E606/E606M-12 Standard Test Method for Strain-Controlled Fatigue Testing
E608/E608M-06 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E609-10 Standard Terminology Relating to Pesticides
E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
E617-97(2008) Standard Specification for Laboratory Weights And Precision Mass Standards
E618-07(2013) Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar
Machine
E619-09 Standard Practice for Evaluating Foreign Odors in Paper Packaging
E620-11 Standard Practice for Reporting Opinions of Scientific or Technical Experts
E631-06 Standard Terminology of Building Constructions
E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E634-12 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
E636-10 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
E637-05(2011) Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental
Measurements of Stagnation-Point Heat Transfer and Pressure
E640-06(2012) Standard Test Method for Preservatives in Water-Containing Cosmetics
E641-01(2012)e1 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
E642-91(2008) Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
E644-11 Standard Test Methods for Testing Industrial Resistance Thermometers
E645-13 Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
E646-07 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
E647-13e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
E648-10e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E649-00(2011) Standard Test Method for Bromine in Chlorine
E650/E650M-12 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
E651/E651M-01(2008) Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance
Assurance for Manufactured Building
E652-91(2009) Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects
E653-91(2009) Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying
Insects
E654-96(2009) Standard Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches
E659-78(2005) Standard Test Method for Autoignition Temperature of Liquid Chemicals
E659-RUS-78(2005) Стандартный метод определения температуры самовозгорания жидких химических веществ
E660-90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular
Track Polishing Machine
E661-03(2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated
Static and Impact Loads
E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E664/E664M-10 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by
Immersion Method
E666-09 Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
E668-13 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in
Radiation-Hardness Testing of Electronic Devices
E670-09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
E671-98(2010) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
E672-87(2011) Standard Specification for Disposable Glass Micropipets
E674-12 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
E675-02(2012) Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
E676-02(2012) Standard Specification for Interchangeable Taper-Ground Joints
E677-94(2010) Standard Specification for Interchangeable Spherical Ground Joints
E678-07(2013) Standard Practice for Evaluation of Scientific or Technical Data
E679-04(2011) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration
Series Method of Limits
E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
E681-09 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
E682-92(2011) Standard Practice for Liquid Chromatography Terms and Relationships
E683-91(2007) Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
E685-93(2013) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
E688-94(2011) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
E689-10 Standard Reference Radiographs for Ductile Iron Castings
E690-10 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes
E691-13 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E693-12 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per
Atom (DPA), E 706(ID)
E694-99(2010) Standard Specification for Laboratory Glass Volumetric Apparatus
E695-03(2009) Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E696-07(2013) Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
E697-96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
E698-11 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning
Calorimetry and the Flynn/Wall/Ozawa Method
E699-09 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building
Components
E701-80(2010) Standard Test Methods for Municipal Ferrous Scrap
E702-85(2010) Standard Specification for Municipal Ferrous Scrap
E703-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
E704-08 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
E705-08 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
E708-79(2011) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
E709-08 Standard Guide for Magnetic Particle Testing
E709-RUS-08 Стандартное руководство по магнитопорошковой дефектоскопии
E712-80(2009) Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating
and Cooling Systems
E714-94(2009) Standard Specification for Disposable Glass Serological Pipets
E715-80(2011) Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of
Chemical Composition by Spectrochemical Analysis
E720-11 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-
Hardness Testing of Electronics
E721-11 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of
Electronics
E722-09e1 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron
Fluence for Radiation-Hardness Testing of Electronics
E723-13 Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper
Industry (Bacterial Spoilage)
E724-98(2012) Standard Guide for Conducting Static Acute Toxicity Tests Starting with Embryos of Four Species of Saltwater
Bivalve Molluscs
E725-96(2012) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
E727/E727M-08 Determining Bulk Density of Granular Carriers and Granular Pesticides
E728-91(2009) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
E729-96(2007) Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and
Amphibians
E732-80(2011) Standard Specification for Disposable Pasteur-Type Pipet
E734-80(2010) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
E736-00(2011) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E738-11 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric
Titrimetry
E739-10 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
E740/E740M-03(2010)e2 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
E741-11 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E744-07 Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
E745-80(2009) Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With
Heat-Transfer Fluids in Solar Heating and Cooling Systems
E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
E747-04(2010) Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators
(IQI) Used for Radiology
E748-02(2008) Standard Practices for Thermal Neutron Radiography of Materials
E749/E749M-12 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
E750-10 Standard Practice for Characterizing Acoustic Emission Instrumentation
E751/E751M-12 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding
E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E755-08 Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)
E756-05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials
E759-92(2011) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760-92(2011) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural
Members
E761-92(2011) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
E768-99(2010) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
E772-11 Standard Terminology of Solar Energy Conversion
E775-87(2008)e1 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
E776-87(2009) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
E777-08 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
E778-08 Standard Test Methods for Nitrogen in the Analysis Sample of Refuse-Derived Fuel
E779-10 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E780-06(2011) Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed
Thermocouples and Thermocouple Cable at Room Temperature
E781-86(2009) Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating
Stagnation in Solar Collectors With Cover Plates
E782-95(2007) Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions
Simulating Operational Mode
E783-02(2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E784-89(2011) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
E785-81(2011) Standard Specification for Crucibles, Ignition, Laboratory, Metal
E786-81(2011) Standard Specification for Dishes, Evaporating, Platinum
E787-81(2011) Standard Specification for Disposable Glass Micro Blood Collection Pipets
E788-97(2008) Standard Specification for Pipet, Blood Diluting
E790-08 Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
E791-08 Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E797/E797M-10 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
E798-96(2009) Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
E799-03(2009) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires
E801-06(2011) Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
E802-95(2010) Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
E803-91(2008) Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
E805-12a Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
E806-08 Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas
Chromatographic Procedure)
E808-01(2009) Standard Practice for Describing Retroreflection
E809-08(2013) Standard Practice for Measuring Photometric Characteristics of Retroreflectors
E810-03(2013) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
E811-09 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems
E815-11 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
E816-05(2010) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
E821-96(2009) Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
E822-92(2009) Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
E824-10 Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of
Human Temperature
E826-08 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
E827-08 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E832-81(2008) Standard Specification for Laboratory Filter Papers
E833-12 Standard Terminology of Building Economics
E834-09 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
E837-08e2 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E839-11 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
E840-95(2013) Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
E841-12a Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption
Spectrometry
E844-09 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance, E 706(IIC)
E848-94(2012) Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble
Chromates
E850-10 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill
E853-01(2008) Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
E854-03(2009) Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor
Surveillance, E706(IIIB)
E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E857-05(2012) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
E859-93(2011) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E860-07 Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation
E861-94(2007) Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866-11 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in
Honeycomb Shelter Panels
E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems
E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
E871-82(2006) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
E872-82(2006) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
E874-11 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E875-10 Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the
Paper Industry
E877-08 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of
Chemical Composition
E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet
Spectrophotometry
E879-12 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
E881-92(2009) Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions
Simulating Stagnation Mode
E882-10 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E883-11 Standard Guide for Reflected–Light Photomicrography
E884-82(2012) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
E887-88(2009) Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
E889-82(2009) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
E890-94(2009) Standard Specification for Disposable Glass Culture Tubes
E894-88(2010) Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E898-88(2005) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
E900-02(2007) Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706
(IIF)
E903-12 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
E904-87(2007) Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors
E905-87(2007) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
E906/E906M-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile
Method
E907-96(2004) Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
E908-98(2012) Standard Practice for Calibrating Gaseous Reference Leaks
E910-07(2013) Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel
Surveillance, E706 (IIIC)
E911-98(2009) Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E917-05(2010) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E918-83(2011) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
E920-97(2008) Standard Specification for Commercially Packaged Laboratory Apparatus
E921-97(2010) Standard Specification for Export Packaged Laboratory Apparatus
E923-97(2008) Standard Specification for Glass Westergren Tube, Reusable
E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does
not Exceed 2 nm
E927-10 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
E929-83(2009) Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment
E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
E934-94(2009) Standard Specification for Serological Pipet, Disposable Plastic
E935-13 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E937-93(2011) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural
Members
E938/E938M-12 Standard Test Method for Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Adult Human
Lice
E939-94(2012) Standard Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important
and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes
E942-96(2011) Standard Guide for Simulation of Helium Effects in Irradiated Metals
E943-08 Standard Terminology Relating to Biological Effects and Environmental Fate
E944-13 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E 706 (IIA)
E945-12 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer
Established Inertial Profiling Reference
E951-94(2006) Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
E953/E953M-08 Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
E955-88(2009)e1 Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples
E956-83(2010) Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
E957-03(2011)e1 Standard Terminology Relating to Geothermal Energy
E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
E959-83(2010) Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
E960-93(2008) Standard Specification for Laboratory Glass Beakers
E961-97(2008) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable
E963-95(2010) Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-
Methanol Electrolyte
E964-06(2010) Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building
Systems
E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
E966-10e1 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
E969-02(2012) Standard Specification for Glass Volumetric (Transfer) Pipets
E970-10 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E971-11 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
E972-96(2007) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
E973-10 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a
Photovoltaic Reference Cell
E974-00(2006) Standard Guide for Specifying Thermal Performance of Geothermal Power Systems
E975-13 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
E976-10 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
E977-05(2010) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials
E979-09 Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water
Containing Hydraulic Fluids
E981-04(2012) Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
E982-94(2009) Standard Specification for Laboratory Glass Test Tubes
E983-10 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
E984-12 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E986-04(2010) Standard Practice for Scanning Electron Microscope Beam Size Characterization
E987-88(2009) Standard Test Methods for Deglazing Force of Fenestration Products
E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)
E990-09 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
E995-11 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron
Spectroscopy
E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
E997-12 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the
Influence of Uniform Static Loads by Destructive Methods
E998-12 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of
Uniform Static Loads by Nondestructive Method
E999-10 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
E1000-98(2009) Standard Guide for Radioscopy
E1001-11 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using
Longitudinal Waves
E1002-11 Standard Practice for Leaks Using Ultrasonics
E1003-13 Standard Practice for Hydrostatic Leak Testing
E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
E1005-10 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
E1006-08 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
E1007-13 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling
Assemblies and Associated Support Structures
E1008-03(2009) Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for
Geothermal and Other High-Temperature Liquid Applications
E1009-95(2006) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy
Steel
E1010-09 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial
Force Application
E1012-RUS-12e1 Стандартная методика проверки центровки испытательных стендов и образцов при приложении к ним
осевых растягивающих и сжимающих усилий
E1014-12 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
E1016-07(2012)e1 Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
E1018-09 Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB)
E1019-11 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt
Alloys by Various Combustion and Fusion Techniques
E1020-96(2006) Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation
E1021-12 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
E1022-94(2013) Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
E1023-84(2007) Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
E1025-11 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators
(IQI) Used for Radiology
E1026-13 Standard Practice for Using the Fricke Dosimetry System
E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings
E1032-12 Standard Test Method for Radiographic Examination of Weldments
E1033-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic
Pipe and Tubing Above the Curie Temperature
E1034-95(2013) Standard Specification for Nuclear Facility Transient Worker Records
E1035-13 Standard Practice for Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures
E1036-12 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays
Using Reference Cells
E1037-84(2009) Standard Test Method for Measuring Particle Size Distribution of RDF-5
E1038-10 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
E1040-10 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
E1042-02(2008)e1 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1043-00(2010) Standard Specification for Pipets, Milk and Cream Examination
E1044-96(2011) Standard Specification for Glass Serological Pipets (General Purpose and Kahn)
E1045-00(2010) Standard Specification for Pipet, Sahli Hemoglobin
E1046-85(2010) Standard Specification for Glass Westergren Tube, Disposable
E1047-85(2010) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
E1048-88(2010) Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants
E1049-85(2011)e1 Standard Practices for Cycle Counting in Fatigue Analysis
E1050-12 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a
Digital Frequency Analysis System
E1052-11 Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension
E1053-11 Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous
Environmental Surfaces
E1054-08(2013) Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents
E1056-85(2007) Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family
Dwellings
E1057-06(2010) Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in
Buildings and Building Systems
E1059-91(2012) Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes
E1061-01(2007) Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
E1064-12 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
E1064-RUS-12 Стандартный метод определения содержания воды в органических жидкостях с помощью
кулонометрического титрования по методу Карла Фишера
E1065-08 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
E1066/E1066M-12 Standard Practice for Ammonia Colorimetric LeakTesting
E1067/E1067M-11 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP)
Tanks/Vessels
E1068-85(2009) Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
E1069-85(2009) Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service
Under Sealing Stress
E1070-11 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
E1074-09 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1077-01(2005) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E1077-RUS-01(2005) Стандартные методы оценки глубины обезуглероживания стальных образцов
E1078-09 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
E1079-10 Standard Practice for Calibration of Transmission Densitometers
E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
E1083-00(2011) Standard Test Method for Sensory Evaluation of Red Pepper Heat
E1084-86(2009) Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
E1086-08 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane
Excitation Technique
E1089-86(2007) Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure
Difference
E1090-08 Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
E1091-08 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1092-91(2010) Standard Specification for Glass Micro Folin Pipet, Disposable
E1093-91(2012) Standard Specification for Glass Prothrombin Pipet, Disposable
E1094-04(2009) Standard Specification for Pharmaceutical Glass Graduates
E1095-99(2010) Standard Specification for Common Laboratory Glass Funnels
E1096-86(2011) Standard Specification for Laboratory Glass Separatory Funnels
E1097-12 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
E1102-91(2009) Standard Terminology Relating to Agricultural Chemical Application
E1104-98(2009) Standard Specification for Clinical Thermometer Probe Covers and Sheaths
E1105-00(2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights,
Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1106-12 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
E1107-10 Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
E1108-86(2009) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
E1109-86(2009) Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
E1110-06(2011) Standard Classification for Determination of Articulation Class
E1111-07 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
E1112-00(2011) Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
E1114-09e1 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
E1115-11 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
E1116-98(2008) Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
E1118/E1118M-11 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
E1119-09 Standard Specification for Industrial Grade Ethylene Glycol
E1120-08 Standard Specification for Liquid Chlorine
E1121-12 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1123-86(2009) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship
Bulkhead Treatment Materials
E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1125-10 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a
Tabular Spectrum
E1127-08 Standard Guide for Depth Profiling in Auger Electron Spectroscopy
E1129/E1129M-08e1 Standard Specification for Thermocouple Connectors
E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
E1131-RUS-08 Стандартный метод анализа состава вещества с помощью термогравиметрии
E1132-06 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
E1133-86(2010) Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government
Procurements
E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
E1136-10 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
E1136-RUS-10 Стандартная спецификация на эталонную радиальную шину P195/75R14 для испытаний
E1137/E1137M-08 Standard Specification for Industrial Platinum Resistance Thermometers
E1139/E1139M-12 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
E1140-95(2010)e1 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas
Chromatography
E1142-13 Standard Terminology Relating to Thermophysical Properties
E1143-05(2010) Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test
Parameter
E1146-08 Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
E1151-93(2011) Standard Practice for Ion Chromatography Terms and Relationships
E1153-03(2010)e1 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
E1154-89(2008) Standard Specification for Piston or Plunger Operated Volumetric Apparatus
E1155-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
E1155M-96(2008) Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
E1157-87(2011) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
E1158-09 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic
Testing of Metal and Metal Alloy Production Material
E1159-98(2009) Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
E1160-87(2007) Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
E1161-09 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
E1162-11 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
E1163-10 Standard Test Method for Estimating Acute Oral Toxicity in Rats
E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
E1165-12 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
E1166-00(2009) Standard Guide for Network Level Pavement Management
E1167-87(2008) Standard Guide for Radiation Protection Program for Decommissioning Operations
E1168-95(2013) Standard Guide for Radiological Protection Training for Nuclear Facility Workers
E1169-13 Standard Practice for Conducting Ruggedness Tests
E1170-97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
E1171-09 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
E1172-87(2011) Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
E1173-01(2009) Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations
E1174-13 Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations
E1175-87(2009) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of
Materials Using a Large Diameter Integrating Sphere
E1177-09 Standard Specification for Engine Coolant Grade Ethylene Glycol
E1178-08 Standard Test Methods for Analysis of Acrylonitrile
E1179-11 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
E1180-08 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181-02(2008) Standard Test Methods for Characterizing Duplex Grain Sizes
E1184-10 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
E1185-12 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-03(2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1188-11 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
E1189-00(2010) Standard Specification for Micro-Burets (Koch Style)
E1190-11 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1191-03a(2008) Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
E1192-97(2008) Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes,
Macroinvertebrates, and Amphibians
E1193-97(2012) Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests
E1197-12 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
E1198-87(2012) Standard Practice for Sampling Zooplankton with Pumps
E1199-87(2012) Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
E1200-87(2012) Standard Practice for Preserving Zooplankton Samples
E1201-87(2012) Standard Practice for Sampling Zooplankton with Conical Tow Nets
E1202-87(2008) Standard Guide for Development of Micronucleus Assay Standards
E1207-09 Standard Practice for The Sensory Evaluation of Axillary Deodorancy
E1208-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
E1209-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
E1210-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
E1212-12 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
E1214-11 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
E1216-11 Standard Practice for Sampling for Particulate Contamination by Tape Lift
E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron
Spectrometers and Some X-Ray Photoelectron Spectrometers
E1218-04(2012) Standard Guide for Conducting Static Toxicity Tests with Microalgae
E1219-10 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
E1220-10 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
E1222-90(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow
Technique
E1226-12a Standard Test Method for Explosibility of Dust Clouds
E1228-09 Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
E1229-08 Standard Specification for Calcium Hypochlorite
E1231-10 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
E1232-07 Standard Test Method for Temperature Limit of Flammability of Chemicals
E1233-06 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air
Pressure Differential
E1234-12 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in
Environmentally Controlled Areas for Spacecraft
E1235-12 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas
for Spacecraft
E1237-93(2009) Standard Guide for Installing Bonded Resistance Strain Gages
E1239-04(2010) Standard Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems
for Electronic Health Record (EHR) Systems
E1241-05(2013) Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes
E1242-97(2008) Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish
Due to Narcosis
E1245-03(2008) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic
Image Analysis
E1247-12 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
E1248-90(2009) Standard Practice for Shredder Explosion Protection
E1249-10 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using
Co-60 Sources
E1250-10 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-
60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
E1251-11 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
E1253-13 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
E1254-08 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films
E1255-09 Standard Practice for Radioscopy
E1256-11a Standard Test Methods for Radiation Thermometers (Single Waveband Type)
E1257-93(2008) Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
E1258-88(2012) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1259-10 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C
E1260-03(2009) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging
Light-Scattering Instruments
E1262-88(2008) Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl
Transferase Gene Mutation Assay
E1263-97(2008) Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
E1264-08e1 Standard Classification for Acoustical Ceiling Products
E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1266-12 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other
Construction Applications
E1268-01(2007) Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E1270-88(2008) Standard Test Method for Equal Arm Balances
E1272-02(2012) Standard Specification for Laboratory Glass Graduated Cylinders
E1273-88(2008) Standard Specification for Color Coding of Reusable Laboratory Pipets
E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph
E1277-08 Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
E1280-97(2008) Standard Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
E1281-10 Standard Guide for Nuclear Facility Decommissioning Plans
E1282-11 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis
Methods for Metals, Ores, and Related Materials
E1285-06 Standard Guide for Identification of Bacteriophage Lambda (λ) or Its DNA
E1286-00(2006) Standard Guide for Identification of Herpes Simplex Virus or Its DNA
E1289-08 Standard Specification for Reference Specimen for Sound Transmission Loss
E1292-94(2011) Standard Specification for Gravity Convection and Forced Ventilation Incubators
E1293-02(2012) Standard Specification for Glass Measuring Pipets
E1295-01(2013) Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia
E1297-08(2013) Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
E1298-06 Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
E1299-96(2010) Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of
Human Temperature
E1300-12ae1 Standard Practice for Determining Load Resistance of Glass in Buildings
E1302-12 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
E1303-95(2010) Practice for Refractive Index Detectors Used in Liquid Chromatography
E1304-97(2008)e1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1306-11 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of
Chemical Composition
E1307-10 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite
Facings to Structural Core for Flat Shelter Panels
E1309-00(2011) Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
E1311-89(2010) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
E1312-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the
Curie Temperature
E1316-13a Standard Terminology for Nondestructive Examinations
E1317-12 Standard Test Method for Flammability of Marine Surface Finishes
E1318-09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
E1319-98(2009) Standard Guide for High-Temperature Static Strain Measurement
E1320-10 Standard Reference Radiographs for Titanium Castings
E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties
E1323-09 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1324-11 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
E1325-02(2008) Standard Terminology Relating to Design of Experiments
E1326-08 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
E1327-07(2012)e1 Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions
E1329-10 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
E1329-RUS-10 Стандартное практическое руководство по поверке и применению контрольных карт при
спектрохимическом анализе
E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
E1332-10a Standard Classification for Rating Outdoor-Indoor Sound Attenuation
E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products
Using a Large Chamber
E1334-95(2012) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1335-08 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
E1336-11 Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard
Reference Test Tire
E1338-09 Guide for Identification of Metals and Alloys in Computerized Material Property Databases
E1340-05(2010) Standard Guide for Rapid Prototyping of Information Systems
E1341-06(2011)e1 Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple
Measurements
E1346-90(2010) Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation
E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
E1348-11 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or
0°:45°) Geometry
E1350-07 Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and
After Installation or Service
E1351-01(2012) Standard Practice for Production and Evaluation of Field Metallographic Replicas
E1352-08a Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353-08ae1 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354-13 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen
Consumption Calorimeter
E1355-12 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
E1358-97(2006) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
E1359-12 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
E1360-05(2010) Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
E1362-10 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method
E1366-11 Standard Practice for Standardized Aquatic Microcosms: Fresh Water
E1367-03(2008) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and
Marine Invertebrates
E1368-11 Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1369-11 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and
Building Systems
E1370-96(2008) Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
E1374-06(2011) Standard Guide for Open Office Acoustics and Applicable ASTM Standards
E1377-99(2010) Standard Specification for Laboratory Glass Kjeldahl Flasks
E1378-99(2010) Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks
E1379-90(2010) Standard Specification for Laboratory Glass Dewar Flask
E1380-90(2010) Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But
Excluding Disposable Prothrombin and Disposable Micropipets
E1382-97(2010) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E1382-RUS-97(2010) Стандартные методы испытания для определения среднего размера зерна с использованием
полуавтоматического и автоматического анализа изображений
E1384-07(2013) Standard Practice for Content and Structure of the Electronic Health Record (EHR)
E1386-10 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
E1388-12 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
E1390-12 Standard Specification for Illuminators Used for Viewing Industrial Radiographs
E1391-03(2008) Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing
and for Selection of Samplers Used to Collect Benthic Invertebrates
E1395-90(2011) Standard Test Method for Sensory Evaluation of Low Heat Chilies
E1396-90(2011) Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
E1397-91(2008) Standard Practice for In Vitro Rat Hepatocyte DNA Repair Assay
E1398-91(2008) Standard Practice for In Vivo Rat Hepatocyte DNA Repair Assay
E1399-97(2009) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of
Architectural Joint Systems
E1402-08e1 Standard Terminology Relating to Sampling
E1403-97(2008) Standard Specification for Laboratory Glass Boiling Flasks
E1404-94(2008) Standard Specification for Laboratory Glass Conical Flasks
E1405-98(2010) Standard Specification for Laboratory Glass Distillation Flasks
E1406-95(2010) Standard Specification for Laboratory Glass Filter Flasks
E1409-08 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas
Fusion Technique
E1409-RUS-08 Стандартный метод испытания для определения содержания кислорода и азота в титане и титановых
сплавах с использованием методики плавления в инертном газе
E1410-91(2005) Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1411-09 Standard Practice for Qualification of Radioscopic Systems
E1412-12 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace
Concentration With Activated Charcoal
E1413-07 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic
Headspace Concentration
E1414/E1414M-11a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1415-91(2012) Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
E1416-09 Standard Test Method for Radioscopic Examination of Weldments
E1417/E1417M-11e1 Standard Practice for Liquid Penetrant Testing
E1418-10 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
E1419-09 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR)
Spectrometers: Level Zero and Level One Tests
E1422-05 Standard Guide for Test Methods for Forensic Writing Ink Comparison
E1423-06 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424-91(2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and
Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-07 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1426-98(2009)e1 Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of
Residual Stress
E1428-99(2009) Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining
by Streptoverticillium reticulum (A Pink Stain Organism)
E1432-04(2011) Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice
Data Sets of Intermediate Size
E1434-00(2013) Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
E1438-11 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
E1439-12 Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
E1440-91(2012) Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
E1441-11 Standard Guide for Computed Tomography (CT) Imaging
E1444/E1444M-12 Standard Practice for Magnetic Particle Testing
E1445-08 Standard Terminology Relating to Hazard Potential of Chemicals
E1446-05 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry
E1447-09 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal
Conductivity/Infrared Detection Method
E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
E1449-92(2011) Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
E1450-09 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1453-09 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
E1454-02(2008) Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
E1455-03(2010) Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
E1456-08 Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
E1457-13 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals
E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask
Reticles
E1459-13 Standard Guide for Physical Evidence Labeling and Related Documentation
E1461-11 Standard Test Method for Thermal Diffusivity by the Flash Method
E1462-12 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
E1463-92(2012) Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests With Mysids From the West Coast
of the United States
E1464-92(2005) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or
Facilities
E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1470-92(2006) Standard Test Method for Characterization of Proteins by Electrophoretic Mobility
E1471-92(2008) Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property
Databases
E1473-09 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
E1474-10 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or
Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1475-02(2008) Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
E1476-04(2010) Standard Guide for Metals Identification, Grade Verification, and Sorting
E1477-98a(2013) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere
Reflectometers
E1478-97(2009) Standard Practice for Visual Color Evaluation of Transparent Sheet Materials
E1479-99(2011) Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers
E1480-92(2013) Standard Terminology of Facility Management (Building-Related)
E1481-00a(2008) Standard Terminology of Railing Systems and Rails for Buildings
E1482-12 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization
E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
[Metric]
E1488-12e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
E1489-08 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial
Profile Measuring Device
E1490-11 Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
E1491-06(2012) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
E1492-11 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
E1493-06 Standard Guide for Identification of Bacteriophage M13 or Its DNA
E1494-12 Standard Practice for Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials
E1495/E1495M-12 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
E1497-05(2011) Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids
E1498-92(2012) Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds
E1499-97(2009) Standard Guide for Selection, Evaluation, and Training of Observers
E1502-10 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1504-11 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
E1506-08 Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)
E1508-12a Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1510-95(2013)e1 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
E1511-93(2010) Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
E1512-01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors
E1513-93(2011) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
E1517-13 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human
Louse Ova
E1518-05(2012) Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic
Shaker Method
E1519-10 Standard Terminology Relating to Agricultural Tank Mix Adjuvants
E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
E1521-01(2006) Standard Test Method for Liquid Holding Capacity of Granular Carriers
E1522-93(2008) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
E1523-09 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
E1525-02(2008) Standard Guide for Designing Biological Tests with Sediments
E1527-05 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
E1527-CH-05 适用于 环境现场评估的标准惯例：第一阶段环境现场评估流程
E1528-06 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
E1528-CH-06 适用于有限环境尽职调查的标准惯例：交易甄别流程
E1529-10 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1530-11 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow
Meter Technique
E1531-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
E1532-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNABinding
Fluorochrome
E1533-00(2006) Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI)
Staining
E1534-93(2006) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
E1536-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method
E1537-13 Standard Test Method for Fire Testing of Upholstered Furniture
E1542-10 Standard Terminology Relating to Occupational Health and Safety
E1543-00(2011) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
E1546-09a Standard Guide for Development of Fire-Hazard-Assessment Standards
E1547-09 Standard Terminology Relating to Industrial and Specialty Chemicals
E1548-09 Standard Practice for Preparation of Aerospace Contamination Control Plans
E1549-06 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for
Spacecraft for Non-Hazardous and Hazardous Operations
E1551-08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction
Measuring Equipment
E1552-08 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic
Emission Spectrometry
E1554/E1554M-13 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-09 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1558-09 Standard Guide for Electrolytic Polishing of Metallographic Specimens
E1559-09 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
E1560-11e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1561-93(2009) Standard Practice for Analysis of Strain Gage Rosette Data
E1562-00(2013) Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
E1563-98(2012) Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
E1564-00(2006) Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining
Cryopreserved Biological Materials
E1565-00(2006) Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
E1566-00(2006) Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
E1568-13 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
E1569-09 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
E1570-11 Standard Practice for Computed Tomographic (CT) Examination
E1571-11 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
E1573-09 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band
Sound Pressure Levels
E1574-98(2006) Standard Test Method for Measurement of Sound in Residential Spaces
E1575-12 Standard Practice for Pressure Water Cleaning and Cutting
E1577-11 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
E1578-06 Standard Guide for Laboratory Information Management Systems (LIMS)
E1582-10 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
E1584-11 Standard Test Method for Assay of Nitric Acid
E1587-10 Standard Test Methods for Chemical Analysis of Refined Nickel
E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray
Spectrometry
E1589-05(2010) Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
E1590-13 Standard Test Method for Fire Testing of Mattresses
E1591-13 Standard Guide for Obtaining Data for Fire Growth Models
E1592-05(2012) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air
Pressure Difference
E1593-13 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor
E1594-11 Standard Guide for Expression of Temperature
E1597-10 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine
Environments
E1600-13 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry
E1601-12 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1602-03(2010)e1 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas
Analyzer in the Hood Mode
E1604-12 Standard Guide for Behavioral Testing in Aquatic Toxicology
E1605-04(2012) Standard Terminology Relating to Lead in Buildings
E1606-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes
E1606-RUS-09 Стандартная методика электромагнитного (вихретокового) исследования медного стержня повторной
протяжки для использования в электротехнике
E1610-02(2008) Standard Guide for Forensic Paint Analysis and Comparison
E1611-00(2013) Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
E1612-94(2009) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICPAES),
Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1614-94(2013) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical
Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
E1616-08 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
E1617-09 Standard Practice for Reporting Particle Size Characterization Data
E1618-11 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass
Spectrometry
E1619-11 Standard Test Method for Chronic Oral Toxicity Study in Rats
E1620-97(2012) Standard Terminology Relating to Liquid Particles and Atomization
E1621-05 Standard Guide for X-Ray Emission Spectrometric Analysis
E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an
Intermediate Scale Calorimeter (ICAL)
E1627-11 Standard Practice for Sensory Evaluation of Edible Oils and Fats
E1628-94(2008) Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the
General Services Administration
E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
E1633-08a(2013) Standard Specification for Coded Values Used in the Electronic Health Record
E1634-11 Standard Guide for Performing Sputter Crater Depth Measurements
E1635-06(2011) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
E1636-10 Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function
E1637-98(2011) Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1638-12 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
E1640-RUS-09 Стандартный метод определения температуры стеклования с помощью динамического механического
анализа
E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with
Earth or Granular Fill Under Concrete Slabs
E1644-04(2012)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-01(2007) Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent
Lead Analysis
E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure
Difference
E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy
E1648-95(2011) Standard Reference Radiographs for Examination of Aluminum Fusion Welds
E1652-10 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the
Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
E1653-94(2013) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
E1654-94(2013) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use
in Remote Raman FiberOptic Spectroscopy
E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
E1656/E1656M-11 Standard Guide for Classification of Automated Pavement Condition Survey Equipment
E1657-98(2011) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
E1658-08 Standard Terminology for Expressing Conclusions of Forensic Document Examiners
E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel
Sheet
E1660-95a(2012) Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95a(2012) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95a(2012) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-03(2010) Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-95a(2012) Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95a(2012) Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666-95a(2012) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95a(2012) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95a(2012) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95a(2012) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95a(2012) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671-95a(2012) Standard Classification for Serviceability of an Office Facility for Cleanliness
E1672-12 Standard Guide for Computed Tomography (CT) System Selection
E1673-96(2012) Standard Test Method for Percent Suspensibility
E1675-04(2012) Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
E1676-12 Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia
Fetida and the Enchytraeid Potworm Enchytraeus albidus
E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
E1678-10 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1679-95(2012) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680-11 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1681-03(2008)e2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of
Metallic Materials
E1682-08 Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
E1683-02(2007) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
E1684-10 Standard Specification for Miniature Thermocouple Connectors
E1685-00(2006) Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
E1686-10 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
E1687-10 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
E1688-10 Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic
Invertebrates
E1689-95(2008) Standard Guide for Developing Conceptual Site Models for Contaminated Sites
E1690-08 Standard Test Method for Determination of Ethanol Extractives in Biomass
E1692-95a(2012) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693-95(2012) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694-95a(2012) Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
E1697-05(2012)e1 Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
E1698-95(2010) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
E1699-10 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects
E1700-95(2005) Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701-95(2012) Standard Classification for Serviceability of an Office Facility for Manageability
E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
E1704-95(2010) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E1705-11 Standard Terminology Relating to Biotechnology
E1706-05(2010) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater
Invertebrates
E1708-95(2007) Standard Practice for Electronic Interchange of Color and Appearance Data
E1709-09 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree
Observation Angle
E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry
Using a Portable Retroreflectometer
E1711-12 Standard Guide for Measurement of Behavior During Fish Toxicity Tests
E1714-07(2013) Standard Guide for Properties of a Universal Healthcare Identifier (UHID)
E1715-01(2013) Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT)
Functions in Computer-Based Patient Record Systems
E1719-12 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
E1721-01(2009) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
E1725-08 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1726-01(2009) Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727-05 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead
Determination
E1729-05 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1730-09 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1731-11 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
E1732-12 Standard Terminology Relating to Forensic Science
E1733-95(2008) Standard Guide for Use of Lighting in Laboratory Testing
E1734-09 Standard Practice for Radioscopic Examination of Castings
E1735-07 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation
from 4 to 25 MeV
E1736-10 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
E1739-95(2010)e1 Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall
Covering or Ceiling Covering Composites Using a Cone Calorimeter
E1742/E1742M-12 Standard Practice for Radiographic Examination
E1744-04(2010) Standard Practice for View of Emergency Medical Care in the Electronic Health Record
E1745-11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete
Slabs
E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
E1747-95(2011) Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
E1748-95(2009) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral
System
E1749-10 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1750-10 Standard Guide for Use of Water Triple Point Cells
E1751/E1751M-09e1 Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple
Combinations
E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
E1755-01(2007) Standard Test Method for Ash in Biomass
E1756-08 Standard Test Method for Determination of Total Solids in Biomass
E1757-01(2007) Standard Practice for Preparation of Biomass for Compositional Analysis
E1758-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid
Chromatography
E1760-09 Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
E1762-95(2013) Standard Guide for Electronic Authentication of Health Care Information
E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
E1765-11 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments
Related to Buildings and Building Systems
E1766-95(2007) Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices
E1767-11 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of
Materials
E1768-95(2013) Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish
E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
E1771-07 Standard Test Method for Determination of Copper in Anode and Blister Copper
E1773-10 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1774-12 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
E1775-07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or
Spectrophotometric Analysis for Lead
E1776-13 Standard Guide for Development of Fire-Risk-Assessment Standards
E1777-09 Standard Guide for Prioritization of Data Needs for Pavement Management
E1778-98a(2008) Standard Terminology Relating to Pavement Distress
E1780-12 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E1781-08 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
E1783-96(2009) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1784-08 Standard Test Method for Total Peroxides in Acrylonitrile
E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared
Spectrophotometry
E1787-08 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by
Ion Chromatography
E1788-08 Standard Test Method for Acidity in Acrylonitrile
E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
E1791-96(2008)e1 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using
Hemispherical Geometry
E1792-03(2011) Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793-11 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type
II Panels
E1795-12 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796-03(2011)e1 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797-12 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1799-12 Standard Practice for Visual Inspections of Photovoltaic Modules
E1800-08 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type
I Panels
E1801-09 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1802-12 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
E1803-06 Standard Test Methods for Determining Structural Capacities of Insulated Panels
E1804-12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1805-13 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
E1806-09 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
E1806-RUS-09 Стандартное практическое руководство по взятию проб стали и чугуна для определения химического
состава
E1808-96(2009) Standard Guide for Designing and Conducting Visual Experiments
E1810-12 Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
E1813-96(2007) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
E1814-96(2007) Standard Practice for Computed Tomographic (CT) Examination of Castings
E1815-08 Standard Test Method for Classification of Film Systems for Industrial Radiography
E1816-12 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
E1817-08 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
E1819-10 Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
E1821-08 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
E1822-13 Standard Test Method for Fire Testing of Stacked Chairs
E1823-13 Standard Terminology Relating to Fatigue and Fracture Testing
E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension
Method
E1825-06(2012) Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826-12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum
Alloys to Be Adhesively Bonded
E1827-11 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1829-09 Standard Guide for Handling Specimens Prior to Surface Analysis
E1830-09 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
E1832-08(2012) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
E1834-11 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
E1835-09 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1836/E1836M-09e1 Standard Practice for Building Floor Area Measurements for Facility Management
E1837-96(2007) Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated
Use Test)
E1838-10 Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents
Using the Fingerpads of Adults
E1839-13 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime
E1840-96(2007) Standard Guide for Raman Shift Standards for Spectrometer Calibration
E1841-04(2012) Standard Guide for Conducting Renewal Phytotoxicity Tests With Freshwater Emergent Macrophytes
E1843-96(2010) Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
E1844-08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire
E1845-09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
E1847-96(2013) Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines
E1848-96(2008) Standard Guide for Selecting and Using Ecological Endpoints for Contaminated Sites
E1849-96(2013) Standard Guide for Fish and Wildlife Incident Monitoring and Reporting
E1850-04(2012) Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests
E1851-09 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1852-08 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace
Atomic Absorption Spectrometry
E1854-07 Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
E1855-10 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement
Damage Monitors
E1856-97(2008) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal
Testing Machines
E1857-97(2004) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
E1859/E1859M-11 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip
Technique
E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging
Radiometers
E1863-07 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
E1865-97(2013) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
E1866-97(2013) Standard Guide for Establishing Spectrophotometer Performance Tests
E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
E1869-04(2010) Standard Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including
Electronic Health Records
E1870-11 Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
E1871-10 Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages
E1873-06 Standard Guide for Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique
E1874-09 Standard Test Method for Recovery of Microorganisms from Skin using the Cup Scrub Technique
E1875-08 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Sonic Resonance
E1876-09 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio by Impulse Excitation of
Vibration
E1877-11 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
E1878-97(2008) Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
E1879-00(2010) Standard Guide for Sensory Evaluation of Beverages Containing Alcohol
E1880-12 Standard Practice for Tissue Cryosection Analysis with SIMS
E1881-12 Standard Guide for Cell Culture Analysis with SIMS
E1882-10 Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique
E1883-02(2007) Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique
E1885-04(2011) Standard Test Method for Sensory Analysis – Triangle Test
E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems
Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1888/E1888M-12 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced
Plastic with Balsa Wood Cores
E1889-97(2009) Standard Guide for Pavement Management Implementation
E1890-11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and
Calculation of a D-Value and Concentration Coefficient
E1892-09 Standard Guide for Preparing Characterization Plans for Decommissioning Nuclear Facilities
E1893-08a Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological
Assessments to Support Unrestricted Release from Further Regulatory Controls
E1894-08 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
E1897-97(2010) Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using
Infrared Imaging Radiometers
E1898-13 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
E1899-08 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric
Titration with Tetrabutylammonium Hydroxide
E1901-08 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic
Methods
E1903-11 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
E1903-CH-11 适用于环保场所评估的标准惯例：第二阶段的环境场地评估流程
E1908-10 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for
Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1909-11 Standard Guide for Time-Intensity Evaluation of Sensory Attributes
E1910/E1910M-04(2009) Test Method for Agricultural pH Control Agents
E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
E1912-98(2004) Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases
E1914-07 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
E1915-11 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base
Characteristics
E1916-11 Standard Guide for Identification of Mixed Lots of Metals
E1917-08 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by
Phosphovanadomolybdate Molecular Absorption Spectrometry
E1918-06 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
E1919-09 Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
E1920-03(2008) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
E1922-04(2010)e1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix
Composite Materials
E1925-10 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
E1928-07 Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
E1930/E1930M-12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using
Acoustic Emission
E1931-09 Standard Guide for X-Ray Compton Scatter Tomography
E1932-12 Standard Guide for Acoustic Emission Examination of Small Parts
E1933-99a(2010) Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
E1935-97(2008) Standard Test Method for Calibrating and Meausring CT Density
E1936-03(2011) Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
E1938-08 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption
Spectrometry
E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion
Analysis
E1942-98(2010)e1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics
Testing
E1943-98(2010) Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FTNIR)
Spectrometers: Level Zero and Level One Tests
E1945-02(2008) Standard Test Method for Percent Dispersibility
E1946-12 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
E1947-98(2009) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
E1948-98(2009) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
E1949-03(2009) Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis
E1951-02(2007) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning
Calorimetry
E1953-07(2013) Standard Practice for Description of Thermal Analysis and Rheology Apparatus
E1954-05(2011) Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
E1955-04(2009) Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390
Reference Radiographs
E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
E1958-12 Standard Guide for Sensory Claim Substantiation
E1959-05(2011) Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
E1960-07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface
E1961-11 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search
Units
E1962-09 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques
E1963-09 Standard Guide for Conducting Terrestrial Plant Toxicity Tests
E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems
E1967-11a Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion
Method and a Phase Contrast Microscope
E1968-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
E1969-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
E1970-11 Standard Practice for Statistical Treatment of Thermoanalytical Data
E1971-05(2011) Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
E1972-04(2011) Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment
E1974-11 Standard Specification for Shelter, Electrical Equipment S-250/G
E1975-09 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976-11 Standard Specification for Shelter, Tactical, Nonexpandable
E1977-11 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978-11 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1979-12 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1980-11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
E1981-98(2012)e2 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
E1982-98(2013) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
E1985-98(2013) Standard Guide for User Authentication and Authorization
E1986-09(2013) Standard Guide for Information Access Privileges to Health Information
E1990-98(2005) Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance
with 40 CFR, Part 280 Regulations
E1991-05 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
E1993/E1993M-98(2013)e1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular
Fill Under Concrete Slabs
E1994-09(2013) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
E1995-12 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed
Chamber, With the Test Specimen Oriented Horizontally
E1996-12a Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems
Impacted by Windborne Debris in Hurricanes
E1997-12 Standard Practice for the Selection of Spacecraft Materials
E1998-11 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2000-05 Standard Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)
E2001-08 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts
E2002-98(2009) Standard Practice for Determining Total Image Unsharpness in Radiology
E2003-10 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
E2004-10 Standard Test Method for Facing Cleavage of Sandwich Panels
E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
E2006-10 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
E2007-10 Standard Guide for Computed Radiography
E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
E2011-13 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity
Using the Entire Hand
E2012-06(2012) Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
E2013-12 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2014-11 Standard Guide on Metallographic Laboratory Safety
E2015-04(2009) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
E2016-11 Standard Specification for Industrial Woven Wire Cloth
E2017-99(2010) Standard Guide for Amendments to Health Information
E2018-08 Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
E2019-03(2007) Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
E2020-99a(2010) Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at
Contaminated Sites
E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
E2022-11 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
E2023-10 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
E2024/E2024M-11 Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
E2025-99(2006) Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact
Energies
E2026-07 Standard Guide for Seismic Risk Assessment of Buildings
E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
E2028-99(2005) Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related
Samples that Are or May Be Involved in Litigation
E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2030-09a Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
E2031-99(2010) Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
E2032-09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
E2033-99(2006) Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
E2034-99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
E2035-12 Standard Terminology Relating to Forensic Psychophysiology
E2036-07 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2037-07 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and
Daniels Method
E2042/E2042M-09 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
E2044-99(2012) Standard Test Method for Spreading of Liquid Agricultural Spray Mixtures
E2045-99(2009) Standard Practice for Detailed Clinical Observations of Test Animals
E2046-08 Standard Test Method for Reaction Induction Time by Thermal Analysis
E2047-10 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
E2048-99(2006) Standard Guide for Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic
Mycobacteria by the Polymerase Chain Reaction Technique
E2049-12 Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Shampoos and Hair Conditioners by
Trained Assessors
E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses,
Calibrated Using Surrogate Mixtures
E2057-10 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation
Apparatus (FPA)
E2059-06(2010) Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
E2060-06 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
E2061-12 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2062-11 Standard Guide for PDD Examination Standards of Practice
E2063-12 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception
(Polygraph) Examinations
E2064-00(2006) Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of
Deception (PDD)
E2065-11 Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
E2066-00(2007) Standard Guide for Validation of Laboratory Information Management Systems
E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2068-00(2008) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
E2071-00(2010) Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
E2072-10 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
E2073-10 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
E2075/E2075M-10 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod
E2076/E2076M-10 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
E2077-00(2010) Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
E2078-00(2010) Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
E2079-07 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
E2080-06 Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders
E2081-00(2010)e1 Standard Guide for Risk-Based Corrective Action
E2082-12 Standard Guide for Descriptive Analysis of Shampoo Performance
E2083-05(2010) Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
E2088-06(2011) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle
Deposition in Cleanrooms and Associated Controlled Environments
E2089-00(2006) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space
Applications
E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using
Optical and Scanning Electron Microscopy
E2091-11 Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
E2093-12 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the
Same Laboratory Organization
E2096/E2096M-10 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
E2097-00(2006) Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of
Biotechnology Products
E2098-00(2006) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in
Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099-00(2007) Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall
Systems
E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index
E2101-00(2005) Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using
an Averaging-Type Spot Measuring Decelerometer
E2102-13 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant
Heater
E2103/E2103M-13 Standard Classification for Bridge Elements—UNIFORMAT II
E2104-09 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis
(TGA/IR)
E2105-RUS-00(2010) Стандартная общая методика термогравиметрического анализа (ТГА), совмещенного с
инфракрасным анализом (ТГА/ИК)
E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion
Chromatography-Infrared (SEC/IR) Analyses
E2107-06 Standard Practice for Environmental Regulatory Compliance Audits
E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
E2109-01(2007) Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E2110-11 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2111-12 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal
Potencies of Liquid Chemicals
E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
E2114-08 Standard Terminology for Sustainability Relative to the Performance of Buildings
E2115-06 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2117-06(2011) Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of
Lead in Paint Films
E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2122-02(2013) Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves
E2123-10 Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation
E2124-10 Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations
E2125-11 Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force
Resisting Systems for Buildings
E2127-01a(2007) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall
Systems in Building Construction
E2128-12 Standard Guide for Evaluating Water Leakage of Building Walls
E2129-10 Standard Practice for Data Collection for Sustainability Assessment of Building Products
E2131-09 Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property
E2132-11 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
E2133-03(2009) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a
Traveled Surface
E2134-01(2006) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish
System (EIFS)
E2135-10a Standard Terminology for Property and Asset Management
E2136-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—
Durability
E2137-06(2011) Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
E2139-05(2011) Standard Test Method for Same-Different Test
E2140-01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141-12 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass
Units
E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for
Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
E2144-11 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace
Atmospheres
E2145-07(2013) Standard Practice for Information Modeling
E2147-01(2013) Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems
E2148-11b Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety
E2149-10 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic
Contact Conditions
E2150-09 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2151-02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and
Detached Dwellings
E2152-12 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
E2153-01(2011) Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
E2154-01(2008) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by
Passive Headspace Concentration with Solid Phase Microextraction (SPME)
E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in
Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
E2159-01(2008) Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or
Technical Experts
E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
E2161-13 Standard Terminology Relating to Performance Validation in Thermal Analysis
E2162-07 Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of
Deception (PDD) Testing of Sex Offenders
E2163-06 Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of
Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
E2164-08 Standard Test Method for Directional Difference Test
E2166-12 Standard Practice for Organizing and Managing Building Data
E2167-01(2008) Standard Guide for Selection and Use of Stone Consolidants
E2168-10 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2169-12 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids
E2171-02(2013) Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
E2172-01(2008) Standard Guide for Conducting Laboratory Soil Toxicity Tests with the Nematode Caenorhabditis elegans
E2173-07(2011) Standard Guide for Disclosure of Environmental Liabilities
E2174-10ae1 Standard Practice for On-Site Inspection of Installed Fire Stops
E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
E2177-11 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a
Standard Condition of Wetness
E2178-13 Standard Test Method for Air Permeance of Building Materials
E2179-03(2009) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact
Sound Transmission Through Concrete Floors
E2180-07(2012) Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or
Hydrophobic Materials
E2181/E2181M-11 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and
Thermocouple Cable
E2186-02a(2010) Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
E2187-09 Standard Test Method for Measuring the Ignition Strength of Cigarettes
E2188-10 Standard Test Method for Insulating Glass Unit Performance
E2189-10e1 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190-10 Standard Specification for Insulating Glass Unit Performance and Evaluation
E2191/E2191M-10 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic
Emission
E2192-08 Standard Guide for Planar Flaw Height Sizing by Ultrasonics
E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
E2193-RUS-08 Метод определения коэффициента пропускания ультрафиолетового излучения моноэтиленгликоля (метод
ультрафиолетовой спектрофотометрии)
E2194-12 Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials
E2195-09 Standard Terminology Relating to the Examination of Questioned Documents
E2196-12 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous
Flow Using Rotating Disk Reactor
E2197-11 Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal
and Sporicidal Activities of Liquid Chemical Germicides
E2198-10 Specification for Phytoseiulus persimilis Athias-Henriot (Acarina:Phytoseiidae)
E2199-08e1 Standard Specification for Encarsia formosa Gahan (Hymenoptera:Aphelinidae)
E2202-02(2009) Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health
Hazards
E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting
Blocks, Spacers and Accessories
E2204-11a Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
E2205/E2205M-02(2009)e1 Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources
E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
E2207-08 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2208-02(2010)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
E2209-02(2006)e2 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
E2210-12 Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice
Guidelines
E2211-02(2010) Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal
(Consumer) Health Record
E2212-02a(2010) Standard Practice for Healthcare Certificate Policy
E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle
Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer
(PHY) Specifications
E2214-12 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
E2215-10 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
E2216-02(2013) Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
E2217-12 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
E2223-12 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics
E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
E2225-10 Standard Guide for Forensic Examination of Fabrics and Cordage
E2226-12 Standard Practice for Application of Hose Stream
E2227-02(2008) Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
E2228-10 Standard Guide for Microscopic Examination of Textile Fibers
E2229-09 Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
E2230-13 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface
Burning Characteristics
E2232-10 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing
Applications
E2234-09 Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL
E2235-04(2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E2236-10 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator
Multijunction Photovoltaic Cells and Modules
E2238-12 Standard Guide for Evacuation Route Diagrams
E2239-12 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2240-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic
Coatings on Sealed Insulating Glass Units
E2241-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive
Electrochromic Coatings on Sealed Insulating Glass Units
E2242-12a Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2245-11 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2246-11 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2247-08 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland
or Rural Property
E2248-13 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
E2249-02(2008) Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and
Elements Using Sound Intensity
E2251-11 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
E2252-12 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child
Occupied Facilities
E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
E2254-11 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
E2256-03(2008) Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms
for Petroleum Service
E2257-13 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data
E2260-03(2012) Standard Guide for Repointing (Tuckpointing) Historic Masonry
E2261/E2261M-12 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
E2262-03(2009) Standard Practice for Estimating Thurstonian Discriminal Distances
E2263-12 Standard Test Method for Paired Preference Test
E2264-05 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2265-09 Standard Terminology for Anchors and Fasteners in Concrete and Masonry
E2266-11 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—
Indoor Air Quality
E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air
Pressure Difference
E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2270-05 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2271-05a(2012)e1 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and
in Other Child-Occupied Facilities
E2273-03(2011) Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS)
Clad Wall Assemblies
E2274-09 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
E2275-03(2008) Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide
Performance
E2276-10 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub
Agents Using the Fingerpads of Adults
E2278-04 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and
Mitigation of Acid Mine Drainage
E2279-09 Standard Practice for Establishing the Guiding Principles of Property Management
E2280-09 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of
Health Care Facilities
E2281-08a(2012)e1 Standard Practice for Process and Measurement Capability Indices
E2282-09 Standard Guide for Defining the Test Result of a Test Method
E2283-08 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2285-08 Standard Guide for Examination of Mechanical Checkwriter Impressions
E2286-08a Standard Guide for Examination of Dry Seal Impressions
E2287-09 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and
Typed Text
E2288-09 Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
E2289-08 Standard Guide for Examination of Rubber Stamp Impressions
E2290-07a Standard Guide for Examination of Handwritten Items
E2292-04(2012) Standard Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents
E2293-03(2008)e1 Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the
Determination of Mercury
E2294-03(2008)e1 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by
Fire Assay Gravimetry
E2295-03(2008)e1 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and
Related Metallurgical Materials by Silver Determination in Slags and Cupels
E2296-03(2008)e1 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical
Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic
Particle Methods
E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials
E2299-11 Standard Guide for Sensory Evaluation of Products by Children
E2300-09 Standard Specification for Highway Traffic Monitoring Devices
E2301-12 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking
Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
E2302-03a(2009) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement
Marking Materials Using a Portable Reflectometer
E2303-11e1 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
E2304-03(2011) Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System
E2306-13 Standard Practice for Disposal of Personal Property
E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale,
Multi-story Test Apparatus
E2308-05 Standard Guide for Limited Asbestos Screens of Buildings
E2309/E2309M-05(2011)e1 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material
Testing Machines
E2310-04(2009) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-
Infrared Spectroscopy
E2311-04(2009) Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2312-11 Standard Practice for Tests of Cleanroom Materials
E2313-08 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical
Instruments Using a Microbiologic Method (Simulated Use Test)
E2315-03(2008) Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
E2317-04(2012) Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic
Copepod
E2319-04(2011) Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure Differences Across the Specimen
E2320-04(2012) Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2321-03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior
Insulation and Finish Systems (EIFS)
E2322-03(2009) Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof
Construction
E2324-04(2011) Standard Guide for PDD Paired Testing
E2325-05e1 Standard Guide for Non-destructive Examination of Paper
E2326-09 Standard Practice for Education and Training of Seized-Drug Analysts
E2327-10 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
E2329-10 Standard Practice for Identification of Seized Drugs
E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled
Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
E2331-04 Standard Guide for Examination of Altered Documents
E2334-09(2013) Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or
a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
E2335-12 Standard Guide for Laboratory Monitors
E2336-04(2009) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2337/E2337M-10 Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing
E2338-11 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference
Standards
E2339-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a
Continuous Reading, Fixed-Slip Technique
E2341/E2341M-05(2009) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping
Distance at Traffic Incident Sites
E2342-10 Standard Test Method for Durability Testing of Duct Sealants
E2344-04(2011) Standard Guide for Data Capture through the Dictation Process
E2346-09 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
E2348-06(2010) Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
E2349-12 Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making;
Melting and Pouring; and Cleaning and Finishing
E2350-07 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
E2351-04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—
Functionality
E2352-04(2010) Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
E2353-06 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2354-10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
E2356-10 Standard Practice for Comprehensive Building Asbestos Surveys
E2357-11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
E2358-04(2010) Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and
Balustrades
E2359-06 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
E2360-04(2010) Specification for Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae)
E2361-04(2007) Standard Guide for Testing Leave-On Products Using In-Situ Methods
E2362-09 Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection
E2363-06a Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
E2364-04(2010) Standard Guide to Speech Recognition Technology Products in Health Care
E2365-05 Standard Guide for Environmental Compliance Performance Assessment
E2366-05 Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable
Reflection Colorimeter
E2367-05 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable
Retroreflection Colorimeter
E2368-10 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2369-12 Standard Specification for Continuity of Care Record (CCR)
E2373-09 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
E2374-10 Standard Guide for Acoustic Emission System Performance Verification
E2375-08 Standard Practice for Ultrasonic Testing of Wrought Products
E2377-10 Standard Specification for Shelter, Electrical Equipment, Lightweight
E2378-05 Standard Practice for the Recognition of Impaired or Retired Personal Property
E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
E2381-04(2010) Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force
Microscopy
E2385-11 Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
E2386-04(2011) Standard Guide for the Conduct of PDD Screening Examinations
E2387-05(2011) Standard Practice for Goniometric Optical Scatter Measurements
E2388-11 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
E2389-05 Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology
E2390-06 Standard Guide for Examination of Documents Produced with Toner Technology
E2392/E2392M-10e1 Standard Guide for Design of Earthen Wall Building Systems
E2393-10a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2394-11 Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
E2395-06 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing
Impact.
E2396-11 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for
Vegetative (Green) Roof Systems
E2397-11 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
E2398-11 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green)
Roof Systems
E2399-11 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
E2400-06 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
E2404-13e1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or
Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface
Burning Charact
E2406-09 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing
Operations
E2407-04(2009) Standard Test Method for Effectiveness of Defoaming Agents
E2408-04(2009) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
E2409-08 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol (Gas Chromatographic Method)
E2411-07 Standard Specification for Chemical Warfare Vapor Detector (CWVD)
E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FTIR)
Spectrometry
E2412-RUS-10 Стандартная методика мониторинга состояния находящихся в условиях эксплуатации смазок методом
анализа трендов с помощью инфракрасной спектрометрии на основе преобразования Фурье (FT-IR)
E2413-04(2009) Standard Guide for Hospital Preparedness and Response
E2414-05 Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids,
Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces
E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors
E2418-06 Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline
Survey Process
E2420-10 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
E2421-10 Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
E2422-11 Standard Digital Reference Images for Inspection of Aluminum Castings
E2425-11 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
E2426-10 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
E2427-11 Standard Test Method for Acceptance by Performance Testing for Sieves
E2428-08 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing
Machines
E2430-05(2013) Standard Specification For Expanded Polystyrene (―EPS‖) Thermal Insulation Boards For Use In Exterior
Insulation and Finish Systems (―EIFS‖)
E2431-12 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal
Loadings
E2432-11 Standard Guide for General Principles of Sustainability Relative to Buildings
E2435-05(2010)e1 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-
Affected Properties
E2436-05(2010) Standard Specification for the Representation of Human Characteristics Data in Healthcare Information Systems
E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and
Related Materials
E2438-05 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and
Related Materials
E2439-09 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of
Deception (Polygraph) Examinations
E2443-05(2010)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
E2444-11e1 Terminology Relating to Measurements Taken on Thin, Reflecting Films
E2445-05(2010) Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems
E2446-05(2010) Standard Practice for Classification of Computed Radiology Systems
E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
E2449-05(2013) Standard Guide for Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and
Other Microorganisms
E2450-11 Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments
E2451-08 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
E2452-12 Standard Practice for Equipment Management Process Maturity (EMPM) Model
E2453-05 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
E2454-05(2011) Standard Guide for Sensory Evaluation Methods to Determine the Sensory Shelf Life of Consumer Products
E2455-06(2013) Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
E2456-06(2012) Standard Terminology Relating to Nanotechnology
E2457-07(2013) Standard Terminology for Healthcare Informatics
E2458-10 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being
Biological Agents from Nonporous Surfaces
E2459-05(2011) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
E2461-12 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
E2462-10 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
E2463-11 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
E2465-11e1 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2466-13 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology
E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors
E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems
E2469-08a Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
E2470-09 Standard Specification for Polyester Grade Ethylene Glycol
E2471-05(2011)e1 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In
Carpets
E2472-12e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
E2473-05(2011) Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record
E2474-06 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology
E2475-10 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
E2476-09 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT
Processes for Pharmaceutical Manufacture
E2478-11 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials
Using Acoustic Emission
E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR)
Waves
E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with MultiValued
Measurands
E2481-12 Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
E2484-08 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
E2485-06 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water
Resistive Barrier Coatings
E2486-06 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
E2490-09 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation
Spectroscopy (PCS)
E2491-08 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and
Systems
E2492-07(2012) Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
E2493-07 Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units
E2494-08 Standard Guide for Examination of Typewritten Items
E2495-13 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition
E2497-11 Standard Practice for Calculation of Asset Movement Velocity (AMV)
E2499-11 Standard Practice for Classification of Asset Physical Location Information
E2500-07(2012) Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical
Manufacturing Systems and Equipment
E2501-11 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
E2502-06(2011) Standard Guide for Medical Transcription Workstations
E2503-13 Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus
E2505-07 Standard Practice for Industrial Rope Access
E2506-11 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
E2510-07(2013) Standard Test Method for Torque Calibration or Conformance of Rheometers
E2511-09 Standard Guide for Detailing of EIFS-Clad Wall Assemblies
E2513-07(2012) Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
E2514-08 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
E2516-11 Standard Classification for Cost Estimate Classification System
E2517-11 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight
Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
E2518-11 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle
(MTV)/ M1082, 5 Ton MTV Trailer)
E2520-07 Standard Practice for Verifying Minimum Acceptable Performance of Trace Explosive Detectors
E2521-07a Standard Terminology for Urban Search and Rescue Robotic Operations
E2522-07(2013) Standard Guide for Quality Indicators for Health Classifications
E2523-13 Standard Terminology for Metalworking Fluids and Operations
E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
E2525-08 Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-
Macrophage Colonies
E2526-08 Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human
Hepatocarcinoma Cells
E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under
Natural Sunlight
E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
E2530-06 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement
Levels Using Si(111) Monatomic Steps
E2531-06e1 Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase
Liquids Released to the Subsurface
E2532-09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
E2533-09 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
E2534-10 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic
Parts
E2535-07 Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
E2537-08 Standard Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical
Manufacturing
E2538-06(2011) Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic
Health Record (EHR) Environment and Networked Architectures
E2539-12 Standard Practice for Multiangle Color Measurement of Interference Pigments
E2540-08 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree
Observation Angle
E2541-10 Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets
E2542-08 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
E2543-08 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
E2544-11a Standard Terminology for Three-Dimensional (3D) Imaging Systems
E2545-07(2012) Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras
E2546-07 Standard Practice for Instrumented Indentation Testing
E2548-11e1 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
E2549-09 Standard Practice for Validation of Seized-Drug Analytical Methods
E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with
Thermogravimetric Analyzers
E2552-08 Standard Guide for Assessing the Environmental and Human Health Impacts of New Energetic Compounds
E2553-07(2013) Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System
E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart
Techniques
E2555-07(2012) Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability
Inspection
E2556/E2556M-10 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical
Attachment
E2557-07 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
E2558-09 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
E2560-07 Standard Specification for Data Format for Pavement Profile
E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors
E2562-12 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous
Flow using CDC Biofilm Reactor
E2563-07 Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate
Count Method
E2564-11 Standard Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC)
Method
E2565-09 Standard Guide for Consensus-based Process for an Occupational Safety and Health Standard that Includes an
Occupational Exposure Guideline
E2566-08 Standard Test Method for Determining Visual Acuity and Field of View of On-Board Video Systems for Teleoperation of
Robots for Urban Search and Rescue Applications
E2567-13 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
E2568-09e1 Standard Specification for PB Exterior Insulation and Finish Systems
E2570-07 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and
Finish Systems (EIFS) or EIFS with Drainage
E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface
Burning Characteristics
E2574/E2574M-12a Standard Test Method for Fire Testing of School Bus Seat Assemblies
E2575-08 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
E2575-RUS-08 Стандартный метод определения содержания кислорода в меди и медных сплавах
E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
E2580-12 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace
Applications
E2581-07 Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound
Pressure Vessels in Aerospace Applications
E2582-07 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace
Applications
E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
E2585-09 Standard Practice for Thermal Diffusivity by the Flash Method
E2586-12b Standard Practice for Calculating and Using Basic Statistics
E2587-12 Standard Practice for Use of Control Charts in Statistical Process Control
E2589-11 Standard Terminology Relating to Nonsieving Methods of Powder Characterization
E2590-09 Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations
E2591-07(2013) Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
E2592-07 Standard Practice for Evaluating Cache Packaged Weight and Volume of Robots for Urban Search and Rescue
E2593-12 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
E2594-09 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
(Performance-Based Method)
E2595-07(2013) Standard Guide for Privilege Management Infrastructure
E2597-07e1 Standard Practice for Manufacturing Characterization of Digital Detector Arrays
E2598/E2598M-13 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch
Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
E2600-10 Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
E2601-08 Standard Practice for Radiological Emergency Response
E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential
Scanning Calorimetry
E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
E2604-09 Standard Practice for Data Characteristics of Equipment Records
E2605-08 Standard Practice for Receiving Property
E2606-08 Standard Practice for Receipt Notification as a Result of Tangible Property Movement
E2607-08 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand
Requirements
E2608-08 Standard Practice for Equipment Control Matrix (ECM)
E2609-08 Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
E2610-08(2011) Standard Test Method for Sensory Analysis—Duo-Trio Test
E2611-09 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the
Transfer Matrix Method
E2613-08 Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents
Using Fingerpads of Adults
E2614-08 Standard Guide for Evaluation of Cleanroom Disinfectants
E2615-08 Standard Specification for Aphidoletes aphidimyza (Rondani) (Diptera: Cecidomyiidae)
E2616-09 Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations
E2617-10 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
E2618-09 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired
Hydronic Heating Appliances
E2619/E2619M-09e1 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in
Buildings
E2620-08 Standard Classification for Program and Project Estimate Summaries
E2623-08e1 Standard Practice for Reporting Thermometer Calibrations
E2624-09 Standard Practice for Torque Calibration of Testing Machines and Devices
E2625-09 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition
Activities
E2626-08e1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully
Recrystallized Polycrystalline Materials
E2628-09e1 Practice for Dosimetry in Radiation Processing
E2629-11 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
E2630-08e1 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
E2631-09 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
E2632/E2632M-13e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
E2634-11 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
E2635-08 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
E2637-08 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150
E2638-10 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
E2639-12 Standard Test Method for Blast Resistance of Trash Receptacles
E2640-10 Standard Guide for Resource Management in Emergency Management and Homeland Security
E2641-09 Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
E2642-09 Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors
E2643-09 Standard Terminology Relating to Natural Multi-Cellular Biological Control Organisms
E2644-08 Standard Specification for Podisus maculiventris (Say) (Hemiptera: Pentatomidae)
E2645-08 Standard Specification for Feltiella acarisuga (Vallot) (Diptera: Cecidomyiidae)
E2646-08 Standard Specification for Amblyseius cucumeris (=Neoseiulus) Oudemans (Acarina: Phytoseiidae)
E2647-13 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor
with Low Shear and Continuous Flow
E2649-12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission
Spectroscopy
E2651-10 Standard Guide for Powder Particle Size Analysis
E2652-12 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer
Than Six Participating Laboratories
E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test
Methods
E2656-10 Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
E2657-11 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
E2658-11 Standard Practices for Verification of Speed for Material Testing Machines
E2659-09e1 Standard Practice for Certificate Programs
E2660-11 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
E2661/E2661M-10 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in
Aerospace Applications
E2662-09 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in
Aerospace Applications
E2663-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test
Methods
E2664-09a Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
E2665-08 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
E2666-09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine
Maintenance Levels for Use at Airports
E2667-09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data
E2668-10 Standard Guide for Emergency Operations Center (EOC) Development
E2669-11 Standard Digital Reference Images for Titanium Castings
E2670-09 Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras
E2671-10 Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property
E2672-09 Standard Practice for Identification and Categorization of Tooling
E2674-09 Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss
E2675-09 Standard Practice for Property Management System Outcomes
E2676-09 Standard Practice for Tangible Property Mobility Index (MI)
E2678-09 Standard Guide for Education and Training in Computer Forensics
E2679-09 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
E2680-09e1 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
E2681-13 Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances
or Petroleum
E2682-09 Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses
E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
E2684-09 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
E2685-09 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test
E2686-09 Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted
by Pesticide Emulsifiable Concentrate (EC) Applications
E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning
Characteristics
E2691-11 Standard Practice for Job Productivity Measurement
E2692-10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,
E2693-09 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
E2694-11 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
E2695-09 Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy
E2696-09(2013) Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
E2698-10 Standard Practice for Radiological Examination Using Digital Detector Arrays
E2699-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital
Radiographic (DR) Test Methods
E2700-09 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
E2701-09 Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation
Processing
E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement
Exposure
E2708-10 Standard Terminology for Personnel Credentialing
E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
E2710-11e1 Standard Guide for Preservation of Charred Documents
E2711-11 Standard Guide for Preservation of Liquid Soaked Documents
E2712-09e1 Standard Test Methods for Forming Superplastic Metallic Sheet
E2713-11 Standard Guide to Forensic Engineering
E2714-09e1 Standard Test Method for Creep-Fatigue Testing
E2715-09 Standard Practice for Moveable Property Storage
E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential
Scanning Calorimetry
E2717-11 Standard Practice for Estimating the Environmental Load of Residential Wastewater
E2718-10 Standard Guide for Financial Disclosures Attributed to Climate Change
E2719-09 Standard Guide for Fluorescence—Instrument Calibration and Qualification
E2720-10 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when
Challenged with Biological Aerosols Containing Human Pathogenic Viruses
E2721-10 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged
with Droplets Containing Human Pathogenic Viruses
E2722-09 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air
Filter Media
E2725-10 Standard Guide for Basic Assessment and Management of Greenhouse Gases
E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
E2727-10 Standard Practice for Assessment of Rainwater Quality
E2728-11 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
E2729-09 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
E2730-10 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic
Reference Junction Compensation Circuits
E2731-09 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion
Event
E2732-11 Standard Practice for Responder Family Support Service
E2733-10 Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank
Systems
E2734/E2734M-10 Standard Specification for Dimensions of Knife-Edge Flanges
E2735-13 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments
E2736-10 Standard Guide for Digital Detector Array Radiology
E2737-10 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
E2738-11 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed
Radiography (CR) Test Methods
E2739-10 Standard Specification for Personnel Decontamination System to be Used During a Chemical Event
E2740-12e1 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
E2741-11 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events,
Trade Shows, and Conferences
E2742-11 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade
Shows, and Conferences
E2743-11 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events,
Trade Shows, and Conferences
E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
E2745-11 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable
Meetings, Events, Trade Shows, and Conferences
E2746-11 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally
Sustainable Meetings, Events, Trade Shows, and Conferences
E2747-11 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events,
Trade Shows, and Conferences
E2748-12a Standard Guide for Fire-Resistance Experiments
E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
E2750-13e1 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
E2751/E2751M-13 Standard Practice for Design and Performance of Supported Laminated Glass Walkways
E2752-10 Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
E2753-10 Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)
E2754-10 Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)
E2755-10 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hand Sanitizer Formulations Using
Hands of Adults
E2756-10 Standard Terminology Relating to Antimicrobial and Antiviral Agents
E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data
E2760-10e2 Standard Test Method for Creep-Fatigue Crack Growth Testing
E2762-10 Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
E2763-10 Standard Practice for Computer Forensics
E2764-11 Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis
E2765-11 Standard Practice for Use of Image Capture and Storage Technology in Forensic Document Examination
E2767-11 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed
Tomography (CT) Test Methods
E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled
Rate of Loading
E2770-10 Standard Guide for Operational Guidelines for Initial Response to a Suspected Biothreat Agent
E2771-11 Standard Terminology for Homeland Security Applications
E2772-13e1 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings,
Events, Trade Shows, and Conferences
E2773-11 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings,
Events, Trade Shows, and Conferences
E2774-11 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade
Shows, and Conferences
E2775-11 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
E2781-11 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
E2782-11 Standard Guide for Measurement Systems Analysis (MSA)
E2783-11 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill
Procedure
E2784-10 Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar)
Method of Hand Contamination
E2785-11 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
E2786-10 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
E2787-11 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single
Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
E2788-11 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing
Media and the Drainage Layer for Vegetative (Green) Roof Systems
E2789-10 Standard Guide for Fretting Fatigue Testing
E2790-11 Standard Guide for Identifying and Complying With Continuing Obligations
E2792-11 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and
Equipment
E2797-11 Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction
E2798-11 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground
Application
E2799-12 Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosaBiofilm using the MBEC Assay
E2800-11 Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials
E2801-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps
E2802-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles:
Hurdles
E2803-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles:
Inclined Planes
E2804-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles:
Stairs/Landings
E2805-11 Standard Practice for Measurement of the Biological Activity of Ricin
E2807-11 Standard Specification for 3D Imaging Data Exchange, Version 1.0
E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
E2810-11e1 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
E2811-11 Standard Practice for Management of Low Risk Property (LRP)
E2812-11 Standard Practice for Uniform Data Management in Asset Management Records Systems
E2813-12 Standard Practice for Building Enclosure Commissioning
E2814-11 Standard Guide for Industrial Woven Wire Filter Cloth
E2816-13 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
E2817-11 Standard Test Method for Test Fueling Masonry Heaters
E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
E2819-11 Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
E2820-11 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-
Based Method)
E2824-11 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
E2825-12 Standard Guide for Forensic Digital Image Processing
E2826-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains:
Continuous Pitch/Roll Ramps
E2827-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains:
Crossing Pitch/Roll Ramps
E2828-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains:
Symmetric Stepfields
E2829-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained
Speed
E2830-11 Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks:
Grasped Sleds
E2831/E2831M-11 Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
E2832-12 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard
Condition of Continuous Wetting (RL-2)
E2833-12 Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction
Activities and Materials Used in Construction, Including Special Inspection
E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking
Analysis (NTA)
E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device
E2837-11 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between
Rated Wall Assemblies and Nonrated Horizontal Assemblies
E2838-11 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid
Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
E2839-11 Standard Test Method for Production of Clostridium difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents
E2840-11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots
E2841-11 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
E2846-11 Standard Guide for Thermocouple Verification
E2847-11 Standard Practice for Calibration and Accuracy Verification of Wideband Infrared Thermometers
E2848-11e1 Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
E2852-13 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
E2853-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI):
Search Tasks: Random Mazes with Complex Terrain
E2854-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight
Range
E2855-12 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-
Sight Range
E2856-13 Standard Guide for Estimation of LNAPL Transmissivity
E2857-11 Standard Guide for Validating Analytical Methods
E2858-12 Standard Practice for Sales of Personal Property
E2859-11 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
E2860-12 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
E2862-12 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
E2863-12 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal
Pressurization
E2865-12 Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials
E2866-12 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl
Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and
Analyzed by Liquid
E2867-13 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
E2870-13 Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the
Palmar Surface and Mechanical Hand Sampling
E2871-12 Standard Test Method for Evaluating Disinfectant Efficacy against Pseudomonas aeruginosaBiofilm Grown in CDC
Biofilm Reactor using Single Tube Method
E2875/E2875M-12 Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
E2877-12e1 Standard Guide for Digital Contact Thermometers
E2882-12 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment
(CFME)
E2885-13 Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
E2888-12 Standard Practice for Process for Inactivation of Rodent Retrovirus by pH
E2889-12 Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
E2890-12 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry
Using the Kissinger Method
E2894-12 Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces
E2896-12 Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial
Towelettes
E2897-12 Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex
vivo Porcine Skin
E2900-12 Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
E2902-12 Standard Practice for Measurement of Body Armor Wearers
E2904-12 Standard Practice for Characterization and Verification of Phased Array Probes
E2905/E2905M-12 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
E2906/E2906M-13 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
E2908-12 Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems
E2909-13 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard
File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations
E2910-12 Standard Guide for Preferred Methods for Acceptance of Product
E2919-13 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF),
Pose
E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry