LIST B ASTM STANDARDS

B1-12 Standard Specification for Hard-Drawn Copper Wire
B2-12e1 Standard Specification for Medium-Hard-Drawn Copper Wire
B3-12 Standard Specification for Soft or Annealed Copper Wire
B5-11 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
B5-RUS-11 Стандартная спецификация на фасонные профили из технически чистой рафинированной меди
высокой проводимости
B6-13 Standard Specification for Zinc
B8-11 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B9-90(2012) Standard Specification for Bronze Trolley Wire
B16/B16M-10 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19-10 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B21/B21M-12 Standard Specification for Naval Brass Rod, Bar, and Shapes
B22-13 Standard Specification for Bronze Castings for Bridges and Turntables
B23-00(2010) Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
B26/B26M-12 Standard Specification for Aluminum-Alloy Sand Castings
B29-03(2009) Standard Specification for Refined Lead
B30-12 Standard Specification for Copper Alloys in Ingot Form
B32-08 Standard Specification for Solder Metal
B33-10 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B39-79(2013) Standard Specification for Nickel
B42-10 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43-09 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B47-95a(2012) Standard Specification for Copper Trolley Wire
B48-00(2011) Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
B49-10 Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
B49-RUS-10 Стандартная спецификация на медную катанку, являющуюся заготовкой для волочения для
электротехнических целей
B61-08 Standard Specification for Steam or Valve Bronze Castings
B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings
B63-07(2013) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B67-05(2011) Standard Specification for Car and Tender Journal Bearings, Lined
B68/B68M-11 Standard Specification for Seamless Copper Tube, Bright Annealed
B68/B68M-RUS-11 Стандартная спецификация на светлоотожженные бесшовные медные трубы
B69-13 Standard Specification for Rolled Zinc
B70-90(2013) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for
Electrical Heating
B75/B75M-11 Standard Specification for Seamless Copper Tube
B76-90(2013) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys
for Electrical Heating
B77-07(2013) Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
B78-90(2013) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
B80-09 Standard Specification for Magnesium-Alloy Sand Castings
B84-07(2013) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
B85/B85M-10 Standard Specification for Aluminum-Alloy Die Castings
B86-13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88-09 Standard Specification for Seamless Copper Water Tube
B88M-05(2011) Standard Specification for Seamless Copper Water Tube (Metric)
B90/B90M-12 Standard Specification for Magnesium-Alloy Sheet and Plate
B91-12 Standard Specification for Magnesium-Alloy Forgings
B92/B92M-11 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
B93/B93M-09 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold
Castings, and Die Castings
B94-07 Standard Specification for Magnesium-Alloy Die Castings
B96/B96M-11 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General
Purposes and Pressure Vessels
B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
B99/B99M-11 Standard Specification for Copper-Silicon Alloy Wire for General Applications
B100-13 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge
and Other Structural Use
B101-12 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B103/B103M-10 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B105-05(2012) Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B106-08 Standard Test Methods for Flexivity of Thermostat Metals
B107/B107M-12 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
B108/B108M-12e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M-11 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule
Stock
B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and
Precision Resistors
B115-10 Standard Specification for Electrolytic Copper Cathode
B115-RUS-10 Стандартная спецификация на катод из электролитической меди
B116-95(2012) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial
Haulage
B117-11 Standard Practice for Operating Salt Spray (Fog) Apparatus
B121/B121M-11 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B122/B122M-11 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and
Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M-13 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B129-12 Standard Specification for Cartridge Brass Cartridge Case Cups
B130-13 Standard Specification for Commercial Bronze Strip for Bullet Jackets
B131-12 Standard Specification for Copper Alloy Bullet Jacket Cups
B134/B134M-08 Standard Specification for Brass Wire
B135-10 Standard Specification for Seamless Brass Tube
B135M-10 Standard Specification for Seamless Brass Tube [Metric]
B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
B137-95(2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
Aluminum
B138/B138M-11 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
B139/B139M-12 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
B140/B140M-12 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and
Shapes
B148-97(2009) Standard Specification for Aluminum-Bronze Sand Castings
B150/B150M-12 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
B151/B151M-05(2011) Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod
and Bar
B152/B152M-13 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B153-11 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B154-12 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B159/B159M-11 Standard Specification for Phosphor Bronze Wire
B160-05(2009)e1 Standard Specification for Nickel Rod and Bar
B161-05(2009) Standard Specification for Nickel Seamless Pipe and Tube
B162-99(2009) Standard Specification for Nickel Plate, Sheet, and Strip
B163-11e1 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B165-RUS-05(2009) Стандартные технические условия на бесшовные трубы и трубки из никель-медного
сплава (UNS N04400)
B166-11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690,
N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-
Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,
B167-11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690,
N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-
Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an
B168-11 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690,
N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-
Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,
B169/B169M-10 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B170-99(2010)e1 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
B170-RUS-99(2010)e1 Стандартная спецификация на профили из бескислородной меди электролитического
рафинирования
B171/B171M-12 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and
Heat Exchangers
B172-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for
Electrical Conductors
B172-RUS-10 Стандартные технические условия на многопроволочные медные жилы из пучковых скруток
для применения в качестве проводников электричества
B173-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members,
for Electrical Conductors
B173-RUS-10 Стандартные технические условия на многопроволочные медные жилы из концентрических
скруток для применения в качестве проводников электричества
B174-10 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176-08 Standard Specification for Copper-Alloy Die Castings
B177/B177M-11 Standard Guide for Engineering Chromium Electroplating
B179-11 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting
Processes
B183-79(2009) Standard Practice for Preparation of Low-Carbon Steel for Electroplating
B187/B187M-11 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and
Shapes
B188-10 Standard Specification for Seamless Copper Bus Pipe and Tube
B189-05(2010) Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical
Purposes
B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials
B193-RUS-02(2008) Стандартный метод определения удельного сопротивления электропроводящих
материалов
B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B196/B196M-07(2013) Standard Specification for Copper-Beryllium Alloy Rod and Bar
B197/B197M-07(2013) Standard Specification for Copper-Beryllium Alloy Wire
B199-12 Standard Specification for Magnesium-Alloy Permanent Mold Castings
B200-85(2009) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and
Ferrous Alloys
B201-80(2009)e1 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
B206/B206M-12 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,
Centrifugal, and Continuous Castings
B208-CH-06 铜合金砂型、永久型、离心型和连续铸造铸件拉伸试样制备规范
B209-10 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M-10 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B210-12 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M-12 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
B211-12e1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B211M-12e1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and
Wire (Metric)
B212-13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter
Funnel
B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
B214-07(2011) Standard Test Method for Sieve Analysis of Metal Powders
B215-10 Standard Practices for Sampling Metal Powders
B215-RUS-10 Стандартные практические руководства по отбору проб металлического порошка
B216-10 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B221-13 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B221M-13 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes (Metric)
B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
B224-10 Standard Classification of Coppers
B224-RUS-10 Стандартная классификация меди
B226-11 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
B227-10 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228-11a Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B229-12 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite
Conductors
B230/B230M-07(2012) Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes
B231/B231M-12 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M-11 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel
Reinforced (ACSR)
B233-97(2012) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
B234-10 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and
Heat Exchangers
B234M-10 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and
Heat Exchangers [Metric]
B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
B237-01(2010) Standard Specification for Refined Antimony
B240-13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M-12 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube
B242-99(2009) Standard Guide for Preparation of High-Carbon Steel for Electroplating
B243-11 Standard Terminology of Powder Metallurgy
B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other
Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B246-05(2010) Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for
Electrical Purposes
B247-09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings
B247M-09 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings [Metric]
B248-12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet,
Strip, and Rolled Bar
B248M-12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet,
Strip, and Rolled Bar (Metric)
B249/B249M-12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod,
Bar, Shapes and Forgings
B250/B250M-13 Standard Specification for General Requirements for Wrought Copper Alloy Wire
B251-10 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B251M-10 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy
Tube [Metric]
B252-92(2009) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion
Coatings
B253-11 Standard Guide for Preparation of Aluminum Alloys for Electroplating
B254-92(2009) Standard Practice for Preparation of and Electroplating on Stainless Steel
B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of
Solid Round Wires Used as Electrical Conductors
B263-04(2010) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
B265-11e1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B267-07(2013) Standard Specification for Wire for Use In Wire-Wound Resistors
B271-11 Standard Specification for Copper-Base Alloy Centrifugal Castings
B272-12 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and
Strip)
B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
B276-05(2010) Standard Test Method for Apparent Porosity in Cemented Carbides
B277-95(2012) Standard Test Method for Hardness of Electrical Contact Materials
B280-13 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and
Conversion Coatings
B283/B283M-12 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286-07(2012) Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B294-10 Standard Test Method for Hardness Testing of Cemented Carbides
B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
B298-12 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B299-13 Standard Specification for Titanium Sponge
B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
B302-12 Standard Specification for Threadless Copper Pipe, Standard Sizes
B306-13 Standard Specification for Copper Drainage Tube (DWV)
B308/B308M-10 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B311-13 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two
Percent Porosity
B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
B313/B313M-09 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
B315-12 Standard Specification for Seamless Copper Alloy Pipe and Tube
B316/B316M-10 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and
Rods
B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles,
and Profiles for Electrical Purposes (Bus Conductor)
B319-91(2009) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating
B322-99(2009) Standard Guide for Cleaning Metals Prior to Electroplating
B324-01(2012) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
B327-13 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B329-06(2012) Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott
Volumeter
B330-12 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds
Using Air Permeability
B331-10 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
B333-03(2013) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
B335-03(2013) Standard Specification for Nickel-Molybdenum Alloy Rod
B338-10e1 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers
and Heat Exchangers
B339-12 Standard Specification for Pig Tin
B343-92a(2009) Standard Practice for Preparation of Nickel for Electroplating with Nickel
B344-11 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for
Electrical Heating Elements
B345/B345M-11 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded
Tube for Gas and Oil Transmission and Distribution Piping Systems
B348-11 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear
Application
B350/B350M-11 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars,
Rod, and Wire for Nuclear Application
B352/B352M-11 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear
Application
B353-12 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for
Nuclear Service (Except Nuclear Fuel Cladding)
B354-12 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
B355-11 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B359/B359M-12 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger
Tubes With Integral Fins
B360-09 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding
Fittings
B364-96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots
B364-RUS-96(2009) Стандартная спецификация на слитки из тантала и танталовых сплавов
B365-12 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
B366-10a Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
B367-09 Standard Specification for Titanium and Titanium Alloy Castings
B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
B369-09 Standard Specification for Copper-Nickel Alloy Castings
B370-12 Standard Specification for Copper Sheet and Strip for Building Construction
B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
B372-12a Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
B374-06(2011) Standard Terminology Relating to Electroplating
B379-11 Standard Specification for Phosphorized Coppers—Refinery Shapes
B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the
Corrodkote Procedure
B381-10e1 Standard Specification for Titanium and Titanium Alloy Forgings
B386-03(2011) Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
B387-10 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
B388-06(2012) Standard Specification for Thermostat Metal Sheet and Strip
B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
B391-09e1 Standard Specification for Niobium and Niobium Alloy Ingots
B391-RUS-09e1 Стандартные технические условия на слитки из ниобия и ниобиевых сплавов
B392-09e1 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
B392-RUS-09e1 Стандартные технические условия на прутки, стержни и проволоку из ниобия и ниобиевых
сплавов
B393-09e1 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
B393-RUS-09e1 Стандартные технические условия на штрипсы, листы и плиты из ниобия и ниобиевых
сплавов
B394-09e1 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
B394-RUS-09e1 Стандартные технические условия на бесшовные и сварные трубы из ниобия и ниобиевых
сплавов
B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and
Condenser Tubes
B398/B398M-02(2013) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M-04(2010) Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B401-12 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-
Reinforced (ACSR/COMP)
B403-12 Standard Specification for Magnesium-Alloy Investment Castings
B406-96(2010) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
B407-RUS-08a Стандартные технические условия на трубы и трубки из никель-железо-хромового сплава
B408-06(2011) Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
B409-06(2011) Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
B413-97a(2012) Standard Specification for Refined Silver
B415-98(2013) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
B416-98(2013) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B417-11 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney
Funnel
B418-12 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B422-10 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium
Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet
and Strip
B423-11 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and
N06845) Seamless Pipe and Tube
B424-11 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate,
Sheet, and Strip
B425-11 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and
Bar
B427-09 Standard Specification for Gear Bronze Alloy Castings
B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
B429/B429M-10e1 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B432-09a Standard Specification for Copper and Copper Alloy Clad Steel Plate
B434-06(2011) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS
N10242)* Plate, Sheet, and Strip
B435-06(2011) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet,
and Strip
B438-13 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B439-12 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
B440-12 Standard Specification for Cadmium
B441-04(2010) Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-
Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
B443-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
B444-06(2011) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and
UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
B444-RUS-06(2011) Стандартные технические условия на трубы и трубки из никель-хром-молибден-
ниобиевых сплавов (UNS N06625 и UNS N06852) и никель-хром-молибден-кремниевого сплава (UNS
N06219)
B446-03(2008)e1 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy
(UNS N06650)* Rod and Bar
B447-12a Standard Specification for Welded Copper Tube
B449-93(2010)e1 Standard Specification for Chromates on Aluminum
B452-09 Standard Specification for Copper-Clad Steel Wire for Electronic Application
B453/B453M-11 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
B455-10 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456-11e1 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel
Plus Chromium
B457-67(2013) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
B462-10e1 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200,
UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276,
UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,
B462-RUS-10e1 Стандартные технические условия на кованые или катаные трубные фланцы, кованые
фитинги и клапаны и детали для эксплуатации в коррозионной среде в условиях высокой температуры из
сплавов UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS
N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS
N08031, UNS N06045, UNS N06025, UNS R20033
B463-10 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
B464-10 Standard Specification for Welded UNS N08020 Alloy Pipe
B465-11 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B466/B466M-09 Standard Specification for Seamless Copper-Nickel Pipe and Tube
B467-09 Standard Specification for Welded Copper-Nickel Pipe
B468-10 Standard Specification for Welded UNS N08020 Alloy Tubes
B470-02(2012) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic
Equipment
B472-10 Standard Specification for Nickel Alloy Billets and Bars for Reforging
B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
B474-03(2009) Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving
Wire
B476-01(2012) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact
Materials
B477-97(2012) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food
Contact, and Other Applications
B480-88(2010) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
B482-85(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical
Examination of a Cross Section
B488-11 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically
Deposited Metal Coatings on Metals
B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-
Purpose Applications
B493/B493M-08e1 Standard Specification for Zirconium and Zirconium Alloy Forgings
B494/B494M-08 Standard Specification for Primary Zirconium
B495-10 Standard Specification for Zirconium and Zirconium Alloy Ingots
B496-13 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B497-00(2012) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
B498/B498M-08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead
Electrical Conductors
B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic
Coatings on Magnetic Basis Metals
B500/B500M-12 Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in
Overhead Electrical Conductors
B501-10 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B502-10 Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum
Conductors
B504-90(2011) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric
Method
B505/B505M-12a Standard Specification for Copper Alloy Continuous Castings
B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks
B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
B511-01(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
B512-04(2009) Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
B514-05(2009) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
B515-95(2009) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811
Alloy Tubes
B516-03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS
N06025, and UNS N06045 Tubes
B517-05(2009) Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS
N06025, and UNS N06045) Pipe
B520-12 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
B521-12 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
B522-01(2012) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
B523/B523M-12a Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
B524/B524M-99(2011) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-
Alloy Reinforced (ACAR, 1350/6201)
B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
B528-12 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
B530-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method:
Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
B533-85(2009) Standard Test Method for Peel Strength of Metal Electroplated Plastics
B534-12 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet,
Strip, and Rolled Bar
B535-06(2011) Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332)
Seamless Pipe and Tube
B536-07(2013) Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate,
Sheet, and Strip
B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B540-97(2012) Standard Specification for Palladium Electrical Contact Alloy
B541-01(2012) Standard Specification for Gold Electrical Contact Alloy
B542-13 Standard Terminology Relating to Electrical Contacts and Their Use
B543/B543M-12 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
B545-97(2009) Standard Specification for Electrodeposited Coatings of Tin
B546-04(2009) Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si
Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-
Fe-Si Alloy (UNS N06045) Pipe
B547/B547M-10 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
B548-03(2009) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B549-13 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel
Reinforced for Use in Overhead Electrical Conductors
B550/B550M-07(2012) Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
B551/B551M-12 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
B552-12 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping
Test
B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
B557-10 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products
B557M-10 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy
Products [Metric]
B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating
B559-12 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
B560-00(2010) Standard Specification for Modern Pewter Alloys
B561-94(2012) Standard Specification for Refined Platinum
B562-95(2012) Standard Specification for Refined Gold
B563-01(2011) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
B564-11 Standard Specification for Nickel Alloy Forgings
B565-04(2010) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-
Heading Wire and Rods
B566-04a(2011) Standard Specification for Copper-Clad Aluminum Wire
B567-98(2009a) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
B568-98(2009) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
B570-06(2010) Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and
Extrusions
B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B572-06(2011) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
B573-06(2011) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)*
Rod
B574-10 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-
Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-
Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
B574-RUS-10 Стандартная спецификация на прутки, изготавливаемые из низкоуглеродистых никель-хром-
молибден, никель-молибден-хром, никель-молибден-хром-тантал, никель-хром-молибден-медь и никель-
хром-молибден-вольфрам сплавов1
B575-10 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-
Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-
Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium
B576-94(2010) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
B577-10 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in
Copper
B577-RUS-10 Стандартные методы определения закиси меди (склонности к водородной хрупкости) в меди
B578-87(2009) Standard Test Method for Microhardness of Electroplated Coatings
B579-73(2009) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
B580-79(2009) Standard Specification for Anodic Oxide Coatings on Aluminum
B581-02(2013)e1 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
B582-07(2013) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and
Strip
B584-13 Standard Specification for Copper Alloy Sand Castings for General Applications
B587-12 Standard Specification for Welded Brass Tube
B588-88(2010) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by
Double-Beam Interference Microscope Technique
B589-94(2012) Standard Specification for Refined Palladium
B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and
Rolled Bar
B592-11 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet,
Strip, and Rolled Bar
B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
B594-13 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
B595-11 Standard Specification for Sintered Aluminum Structural Parts
B596-89(2012) Standard Specification for Gold-Copper Alloy Electrical Contact Material
B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
B599-92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy
(UNS N08700) Plate, Sheet, and Strip
B600-11 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
B601-12 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
B602-88(2010) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
B603-07(2013) Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating
Elements
B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium
on Plastics
B605-95a(2009) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
B606-08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and
Aluminum-Alloy Conductors, Steel Reinforced
B607-91(2009) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
B608-11 Standard Specification for Welded Copper-Alloy Pipe
B609/B609M-12 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers,
for Electrical Purposes
B610-13 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
B613-76(2012) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for
Sliding Electric Contacts
B614-10 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
B615-79(2011) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
B616-96(2012) Standard Specification for Refined Rhodium
B617-98(2010) Standard Specification for Coin Silver Electrical Contact Alloy
B618/B618M-11a Standard Specification for Aluminum-Alloy Investment Castings
B619-10e1 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B620-03(2013) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet,
and Strip
B621-02(2011) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
B622-10 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
B624-07(2012) Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic
Application
B625-05(2011) Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354,
and UNS R20033 Plate, Sheet, and Strip
B626-10e1 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
B628-98(2010) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
B630-88(2010) Standard Practice for Preparation of Chromium for Electroplating with Chromium
B631-93(2010) Standard Specification for Silver-Tungsten Electrical Contact Materials
B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633-11 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B634-88(2009) Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
B635-00(2009) Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
B636-84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the
Spiral Contractometer
B637-12e1 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and
Forging Stock for Moderate or High Temperature Service
B639-02(2013) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and
UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
B640-12a Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
B643-12 Standard Specification for Copper-Beryllium Alloy Seamless Tube
B644-11 Standard Specification for Copper Alloy Addition Agents
B645-10 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
B646-12 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness
Gage
B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
B649-06(2011) Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS
N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N
Alloy (UNS N08936) Wire
B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous
Substrates
B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper
Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
B652/B652M-10 Standard Specification for Niobium-Hafnium Alloy Ingots
B653/B653M-11 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
B654/B654M-10 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
B655/B655M-10 Standard Specification for Niobium-Hafnium Alloy Bar and Wire
B657-11 Guide for Metallographic Identification of Microstructure in Cemented Carbides
B658/B658M-11e1 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B661-12 Standard Practice for Heat Treatment of Magnesium Alloys
B662-94(2012) Standard Specification for Silver-Molybdenum Electrical Contact Material
B663-94(2012) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
B664-90(2012) Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material
B665-08(2012) Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
B668-05(2010) Standard Specification for UNS N08028 Seamless Pipe and Tube
B670-07(2013) Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and
Strip for High-Temperature Service
B671-81(2010) Standard Specification for Refined Iridium
B671-RUS-81(2010) СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА РАФИНИРОВАННЫЙ ИРИДИЙ
B672-02(2013) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS
N08700) Bar and Wire
B673-05(2011)e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
B674-05(2011) Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
B675-02(2013) Standard Specification for UNS N08367 Welded Pipe
B676-03(2009) Standard Specification for UNS N08367 Welded Tube
B677-05(2010)e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
B678-86(2011) Standard Test Method for Solderability of Metallic-Coated Products
B679-98(2009) Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
B680-80(2009) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
B682-01(2009) Standard Specification for Standard Metric Sizes of Electrical Conductors
B683-01(2012) Standard Specification for Pure Palladium Electrical Contact Material
B684-97(2012) Standard Specification for Platinum-Iridium Electrical Contact Materials
B685-01(2012) Standard Specification for Palladium-Copper Electrical Contact Material
B686/B686M-11 Standard Specification for Aluminum Alloy Castings, High-Strength
B687-99(2011) Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B688-96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367)
Plate, Sheet, and Strip
B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings
B690-02(2013) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS
N08367) Seamless Pipe and Tube
B691-02(2013) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS
N08367) Rod, Bar, and Wire
B692-90(2012) Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material
B693-91(2012) Standard Specification for Silver-Nickel Electrical Contact Materials
B694-13 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel
(CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B695-04(2009) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B696-00(2009) Standard Specification for Coatings of Cadmium Mechanically Deposited
B697-88(2010) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and
Inorganic Coatings
B698-10 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
B701/B701M-13 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel
Reinforced (ACSR/SD)
B702-93(2010) Standard Specification for Copper-Tungsten Electrical Contact Material
B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold
Meter
B704-03(2009) Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
B705-05(2009) Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B706-00(2011) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
B708-12 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
B709-04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet,
and Strip
B710-04(2009) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
B711-13 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced
(AACSR) (6201)
B712-93(2012) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide
Contact Materials
B717-96(2012) Standard Specification for Refined Ruthenium
B718-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Plate, Sheet, and Strip
B719-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Bar
B722-06(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Seamless Pipe and Tube
B723-00(2009) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Welded Pipe
B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage,
Portable, Non-Caliper-Type Instrument
B725-05(2009) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy
(UNS N04400) Pipe
B726-02(2011) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Welded Tube
B727-04(2009) Standard Practice for Preparation of Plastics Materials for Electroplating
B729-05(2009) Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe
and Tube
B730-08(2013) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy
(UNS N04400) Tube
B731-96(2012) Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material
B733-04(2009) Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses
B735-06(2011) Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding
Stock
B737-10 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
B738-13 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors
for Use as Electrical Conductors
B739-03(2013) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
B740-09 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B742-90(2012) Standard Specification for Fine Silver Electrical Contact Fabricated Material
B743-12 Standard Specification for Seamless Copper Tube in Coils
B744/B744M-05(2011) Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B745/B745M-12 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B746/B746M-02(2012) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted
Pipe, Pipe-Arches, and Arches
B747-11 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of
Cross Section with a Scanning Electron Microscope
B749-03(2009) Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B750-12 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip
Coatings
B751-08(2013) Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
B752-06(2011)e2 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General
Application
B753-07(2013) Standard Specification for Thermostat Component Alloys
B754-10 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper
Alloy Strip
B755-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate,
Sheet, and Strip
B756-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and
Bar
B757-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded
Pipe
B758-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded
Tube
B759-00(2011) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe
and Tube
B760-07(2013) Standard Specification for Tungsten Plate, Sheet, and Foil
B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by
X-Ray Monitoring of Gravity Sedimentation
B762-90(2010) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
B763-13 Standard Specification for Copper Alloy Sand Castings for Valve Applications
B764-04(2009) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of
Individual Layers in Multilayer Nickel Deposit (STEP Test)
B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related
Metallic Coatings
B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium
B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by
Gravimetric and Other Chemical Analysis Procedures
B768-11 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and
Sheet
B769-11 Standard Test Method for Shear Testing of Aluminum Alloys
B770-10 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
B771-11e1 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
B772-97(2012) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing
and Nonarcing)
B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact
Assemblies
B774-00(2010) Standard Specification for Low Melting Point Alloys
B775-13 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B776-12 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
B777-07(2013) Standard Specification for Tungsten Base, High-Density Metal
B778-02(2012) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors
(AAC/TW)
B779-12 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-
Reinforced (ACSR/TW)
B780-98(2010) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
B781-93a(2012) Standard Guide for Silver-Cadmium Oxide Contact Material
B783-10 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
B784-01(2012) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in
Insulated Electrical Cables
B786-08(2013) Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for
Subsequent Insulation
B787/B787M-04(2009) Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for
Subsequent Insulation
B788/B788M-09 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer
Pipe
B789/B789M-99(2011) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts
and Sewers
B790/B790M-11 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches
for Culverts, Storm Sewers, and Other Buried Conduits
B792-13 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B793-13 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection
Molds
B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems
Using Electrical Resistance Measurements
B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination
Present in Powder Forged (PF) Steel Materials
B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF)
Applications
B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle
Oxide Networks in Powder Forged (P/F) Steel Parts
B798-95(2009) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk
Electrography
B799-95(2009) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-
Dioxide Vapor
B800-05(2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes – Annealed and
Intermediate Tempers
B801-07(2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for
Subsequent Covering or Insulation
B802/B802M-10 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for
Aluminum Conductors, Steel Reinforced (ACSR)
B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire
for Use in Overhead Electrical Conductors
B804-02(2013) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
B805-06(2011) Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
B806-CH-08a 标准修订草案铜合金永久铸模铸件一般应用标准
B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B808-10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal
Microbalances
B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-
Sulfur”)
B810-01a(2011) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in
Mass of Copper Coupons
B811-13 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure
Connections Involving Aluminum and Intended for Residential Applications
B813-10 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B814-06(2011) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920)
Plate, Sheet, and Strip
B815-02(2011) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233)
Rod
B816-00(2009) Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
B817-08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
B818-03(2013) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233)
Plate, Sheet and Strip
B819-00(2011) Standard Specification for Seamless Copper Tube for Medical Gas Systems
B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
B821-10 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
B822-10 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light
Scattering
B823-09 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
B824-11 Standard Specification for General Requirements for Copper Alloy Castings
B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
B826-09 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
B827-05(2009)e2 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
B828-02(2010) Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and
Fittings
B829-04A(2009)e1 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe
and Tube
B830-11 Standard Specification for Uniform Test Methods and Frequency
B831-11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
B832-93(2008) Standard Guide for Electroforming with Nickel and Copper
B833-13 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion
Protection of Steel
B834-95(2009) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-
Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe
Flanges, Fittings, Valves, and Parts
B835-04(2009) Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire
Construction
B836-00(2011) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input
Wire Construction
B837-10 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel
Distribution Systems
B839-04(2009) Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded
Articles, Fasteners, and Rod—Inclined Wedge Method
B840-99(2009) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
B841-99(2010) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
B842-99(2011) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B844-98(2010) Standard Guide for Silver-Tin Oxide Contact Material
B845-97(2008)e2 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
B846-11a Standard Terminology for Copper and Copper Alloys
B848-10 Specification for Powder Forged (P/F) Ferrous Materials
B849-02(2013) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen
Embrittlement
B850-98(2009) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen
Embrittlement
B851-04(2009) Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel,
Autocatalytic Nickel, or Chromium Plating, or as Final Finish
B852-12 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of
Sheet Steel
B853-12 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
B854-98(2010)e1 Standard Guide for Measuring Electrical Contact Intermittences
B855-11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall
Flowmeter Funnel
B856-13 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported
(ACSS)
B857-11e2 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors,
Coated-Steel Supported (ACSS/TW)
B858-06(2012) Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion
Cracking in Copper Alloys
B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds
Prior to Particle Size Analysis
B860-13 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B861-10 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
B863-12 Standard Specification for Titanium and Titanium Alloy Wire
B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts
B865-04(2010) Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500)
Bar, Rod, Wire, Forgings, and Forging Stock
B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by
Polysulfide Immersion
B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems
B869-07(2013) Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and
C17510)
B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
B872-06(2011) Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
B873-12 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212,
B329, and B417
B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the
Phosphomolybdic Acid (PMA) Method
B878-97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
B879-97(2013) Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and
Magnesium Alloys
B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel,
Nickel Alloys and Cobalt Alloys
B881-09 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
B882-10 Specification for Pre-Patinated Copper for Architectural Applications
B883-10e1 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
B884-11 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
B884-RUS-11 Стандартные технические условия на цилиндрические заготовки, стержни и прутки из сплавов
ниобия-титана для изготовления сверхпроводящих компонентов
B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
B886-12 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
B887-12 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
B888-12 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring
Contacts
B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and
Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
B891-12 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat
Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
B892-10 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
B893-98(2013) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
B894-10e1 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
B895-05(2010)e1 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder
Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
B896-10e1 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
B897-10 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Block and Half Block Ingot
B898-11 Standard Specification for Reactive and Refractory Metal Clad Plate
B899-13 Standard Terminology Relating to Non-ferrous Metals and Alloys
B900-04(2010) Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government
Agencies
B901-04(2011) Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input
Wire Construction
B902-13 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft
Using Single Input Wire Construction
B903-10 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
B904-00(2009) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic
Interference Shielding
B905-00(2010) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the
Mechanized Tape Test
B906-02(2012) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate,
Sheet, and Strip
B907-13 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908-09 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B909-00(2011) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum
Products
B910/B910M-07(2013) Standard Specification for Annealed Copper-Clad Steel Wire
B911/B911M-12 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
B912-02(2013) Standard Specification for Passivation of Stainless Steels Using Electropolishing
B913-05(2010) Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller
Diameter Stranded and Solid Conductors
B914-13 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B915-01(2013) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
B916-01(2013)e1 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
B917/B917M-12 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B919-12 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
B920-01(2011) Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors
of Sodium Hypochlorite Solution
B921-08(2013) Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and
Aluminum Alloys
B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
B923-10 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
B924-02(2012) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger
Tubes With Integral Fins
B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
B926-09 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a
Light Table
B927/B927M-09 Standard Specification for Brass Rod, Bar, and Shapes
B928/B928M-09 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service
and Similar Environments
B929-05(2011)e1 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in
Cemented Tungsten Carbides (Hardmetals)
B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder
Metallurgy (P/M) Parts
B932-04(2010) Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate,
Sheet, and Strip
B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
B934-10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using
Microindentation Hardness Measurements
B935-05(2009)e1 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
B937-04(2010) Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
B939-09 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and
Structural Materials
B940-05(2009)e1 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
B941-10 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B942-10e1 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of
Crimped Wire Terminations
B943-13 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B944-11 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No.
C17510)
B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping
Process for Production of T1, T2, T5 and T10-Type Tempers
B946-11 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
B947-06(2013) Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
B950-11a Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper
Alloys
B951-11 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B952/B952M-13 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission
Spectrometry
B955/B955M-11 Standard Specification for Aluminum-Alloy Centrifugal Castings
B956-10 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with
Integral Fins
B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel
Core Wire for Overhead Electrical Conductors
B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-
Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
B960-13 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
B961-13 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic
Space Application
B962-13 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using
Archimedes’ Principle
B963-13 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of
Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical
and Electronic Application for Solderability
B966-10 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
B967/B967M-12a Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
B968/B968M-10 Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B969/B969M-11 Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast
and Rheocast Semi-Solid Casting Processes
B970-09 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
B971-10 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in
Electronic Application
B972-10 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in
Electronic Application
B973-10 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic
Application
B974/B974M-12a Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
B976-11 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum
Conductors, Composite Reinforced (ACCR)
B977-11 Standard Specification for Titanium and Titanium Ingots
B979-12 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical
Conductors
B981/B981M-12 Standard Specification for Low Leaded Brass Rod, Bar and Shapes
B982-12 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission
Spectrometric OR ICP Analysis
B983-13 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
B984-12 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
B985-12 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished
Wrought Aluminum Products for Compositional Analysis
B986-13 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors
Intended for use in Electronic Application
B988-13 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components